BUILD Network docker lancache

Volkswagen06 · October 20, 2024

1. Without the machine itself, the computer, the Ubuntu Server installation, I don't know if I need to configure it statically or DHCP or Bridge from the network
2. Configuring Docker for Lancache is only a problem, I don't know where I'll get DNS, IP, I don't know what you did
3. For saving the cache from .env (under SMB Truenas Salce, I also don't know if it requires a bridge or statically or DHCP to share the folder for saving under the cache to NFS for the directory) and it's interesting whether ISCSI under the disk or not, I'm curious about the questions
4. I don't want to rewrite to the router, I just want Tailsce itself, it should be all the time, the quality of the VPN was apparently DNS under LANCACHE quite and plus the Internet operation, also saving should be apparently IP (DNS) the same that are rewritten under UBUNTU SERVER and not to the router DNS, only TAILSCE itself, I'm curious what you will say, it needs a complete
A Case about the Proxmox Machine or Vmware or hexOS etc. total I don't know how but only one problem where can I get DNS correctly which ones are correct I don't want to buy DNS I just want free questions where can I get it or help BIND I have to process DNS there under UBUNTU SERVER or what
I just don't know how they LTTS and Jake did it I don't know

Please let me answer

Because I played a lot and it didn't work and if through TRUENAS Salce the latest under docker apps then ok but the problem is the company blocked under shell apt prohibited I don't know why how to solve this I want to give up everything under ubuntu server SMB, NFS and ISCIS to the folder and then under docker lancache it has to save cache under the folder and TAILSCE does not know DNS all the time e.g. ubuntu server is running under docker lancache I have access IP from connected tailsce are green but as I typed the command in windows cmd nslookup steam.cache.lancache.net
nslookup lancache.steamcontent.com this shows your server with the steam company and it should server under ubuntu server must apparently for you to go to this server ubuntu I don't know you can give especially I need quite a step

Volkswagen06 · October 21, 2024

1 hour ago, borlinjo1 said:

I have a squid proxy setup in docker on my home network that is used for packages and for a few of the computers that I use that rarely leave the house and thus I don't have to toggle the proxy. Squid runs really well inside of a container and requires very little setup. It just works. My understanding is that lancache is really kind of a bespoke system for transparently caching when you don't want to have to have a ton of people change their proxy settings. That is, it's great for a LAN party but on a home network, a generic proxy may be just as useful.

And I wonder how you did it to get DNS under TRUENAS Salce, access to save not our disk but to the cloud under SMB, NFS, ISCSI so that it works but the problem is that I don't want it under the router but under VPN with (TAILSCE) they have to apparently because when I install under Tailsce e.g. to UBUNTU SERVER but without machines they read all the time only the problem remained that docker does not see under only talks with 0.0.0.0 and mainly has yours has 172.xx.xx.xx and how to do it and also the DNS problem with port 53 and if I additionally install Pi-hole they will apparently work under Lancache unless there are quality disruptions how to solve it and if on the proxmox machine etc. well I wonder what you will say exactly I want exactly or give especially youtube or something link or something to build it has it comes out because when I did it my own DNS does not respond this one under docker with ubuntu server or other linux does not respond only all the time means that there is no internet but the rest are ping responds only says that the server can't find steam.cache.lancache.net: NXDOMAIN from its own BIND failed and I wonder what you know others have their own only this ip 8.8.8.8,1.1.1.1,9.9.9.9 other I don't want this only straight to receive respond but I don't want it was on static only dhcp I meant with IPV4 and IPV6 together I want to know this And where do I do that from so that it automatically redirects HELLLLLPPP

tunassub · October 31, 2024

I have this deployed on UnRaid and it was as simple as grabbing these three containers from the community app store and following the instructions to set them up. I just point the DNS of whatever machine I am using at the Lancache DNS container's IP address and voila gigabit speeds.