Jump to content

Abnormal tech and display issue

Asylum2904
By Asylum2904
in Troubleshooting
 Share
Posted (edited)

 

 

Hey so I’ve had this pc for around 6-7 months now and on an odd occasion it completely shut off the display ports that are plugged into a nividia gtx 1060 6gb gddr5 VRAM. Power is being supplied through a 6pin connection and the psu is a 600W FX Pro I was playing EFT and the display ports went I’ve tried unplugging display ports from the gpu unplugging the power and trying the display ports through my mother board it didn’t seem too work even when I tried a fresh new monitor it didn’t work but I don’t know what I can do about it the pc still turns on and the fans on the case cpu and gpu are all running indicating it’s still got power and turning on any advice on what I should do please reply and I’ll try it (unless I already have) 

 

cpu is ryzen 5600g 

ram is 3200mhz 

Asus A520M-K 

Edited by Asylum2904
Link to comment
https://linustechtips.com/topic/1585577-abnormal-tech-and-display-issue/
Share on other sites
Link to post
Share on other sites
Posted
30 minutes ago, Asylum2904 said:

Hey so I’ve had this pc for around 6-7 months now and on an odd occasion it completely shut off the display ports that are plugged into a nividia gtx 1060 6gb gddr5 VRAM. Power is being supplied through a 6pin connection and the psu is a 600W FX Pro I was playing EFT and the display ports went I’ve tried unplugging display ports from the gpu unplugging the power and trying the display ports through my mother board it didn’t seem too work even when I tried a fresh new monitor it didn’t work but I don’t know what I can do about it the pc still turns on and the fans on the case cpu and gpu are all running indicating it’s still got power and turning on any advice on what I should do please reply and I’ll try it (unless I already have) 

 

cpu is ryzen 5600g 

ram is 3200mhz 

Asus A520M-K 

Drivers?

Link to post
Share on other sites
Posted
  • Author
11 hours ago, Zenny232323 said:

That sounds like a dead GPU man. Are all of the ports gone? None of them work? Can you plug your monitor into the CPU if it has a iGPU?

 

I’ve plugged it into the cpu and the monitor still doesn’t turn on I think it could be a dead cpu because it’s not loading a boot drive for the monitors too turn on 

Link to post
Share on other sites
Posted
8 hours ago, Asylum2904 said:

I’ve plugged it into the cpu and the monitor still doesn’t turn on I think it could be a dead cpu because it’s not loading a boot drive for the monitors too turn on 

I wouldn't rule that out first. Try a diffrent cable, reseat the CPU,RAM, clear the cmos battery. Also does your motherboard have any error lights?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×