Adapter help

[alphaburst21]

Hey it's me again, this time coming with a question about Molex to 6 or 8 pin adapters.
Do 2 molex connectors to one 6 pin or 8 pin connector would be enough to power a Sapphire RX 570 (dual fan model)
At first I thought of using 2 sets of adapters, one being 2 molex to one 6 pin and from that 6 pin using a 2 six pin with the only 6 pin connector that my power supply has and the six pin from the 2 molex cables to a single 8 pin to power the gpu?

Would that be sufficient to run the gpu in 1080p? or should I look into getting a better power supply right away? (I was planning to get a better psu later down the line)
btw here is the link to the gpu in question https://allegro.pl/oferta/karta-graficzna-sapphire-radeon-rx-570-8-gb-nitro-14675847143

[alphaburst21]

My power supply is a Tracer 500 watter

 

[--SID--]

You need a new PSU if you have this piece of trash. It's a terrible PSU. With 27,5A @12v it's not even a 350w PSU.

 

[alphaburst21]

13 hours ago, --SID-- said:

You need a new PSU if you have this piece of trash. It's a terrible PSU. With 27,5A @12v it's not even a 350w PSU.

 

I am looking forward to getting a used unit like this or similar, I will probably make a post after receiving my first paycheck
https://allegro.pl/oferta/silentiumpc-vero-l2-bronze-500-w-14638706635