Pc problem

[Jukime]

I have a problem on an asus prime a320m-a i get 1 long beep and 2 short ones and i reinstall the ram no use i reinstall the graphic card and i tried without ram in it same problem with out the graphic card no use i even started without the small battery and i still get the same problem. What can i do? (And this morning it started with the beeps i reseted the bios and it did it again i try to restart and it worked but after 2 hrs it shutdown and started to beep again like that and no matter what i do it still does ( i reseted the bios like 4 times and nothing changes) Did i fry my motherboard or cpu? 

[ET_Explorer]

1 hour ago, Jukime said:

I have a problem on an asus prime a320m-a i get 1 long beep and 2 short ones and i reinstall the ram no use i reinstall the graphic card and i tried without ram in it same problem with out the graphic card no use i even started without the small battery and i still get the same problem. What can i do? (And this morning it started with the beeps i reseted the bios and it did it again i try to restart and it worked but after 2 hrs it shutdown and started to beep again like that and no matter what i do it still does ( i reseted the bios like 4 times and nothing changes) Did i fry my motherboard or cpu? 

1 long and 2 short indicates a Parity Circuit Failure. This is a failure of the component that checks the RAM parity bits, so this is likely a RAM error. I would suggest popping the RAM cards out and back in. If that fails then try running on just two RAM cards (A2 and B2).   

[Jukime]

13 hours ago, ET_Explorer said:

1 long and 2 short indicates a Parity Circuit Failure. This is a failure of the component that checks the RAM parity bits, so this is likely a RAM error. I would suggest popping the RAM cards out and back in. If that fails then try running on just two RAM cards (A2 and B2).   

So i tried to start it without ram and no gpu same thing and the ram normaly sits in slot 2 and 4 (thats how my motherboard wants its 3 1 4 2 ) and i put only 1 stick in "2" nothing 1 in slot "3" nothing both back in "1" and '2" nothing .. edit : just now i changed the position to "3" and "4" and still same problem

[Jukime]

40 minutes ago, Jukime said:

So i tried to start it without ram and no gpu same thing and the ram normaly sits in slot 2 and 4 (thats how my motherboard wants its 3 1 4 2 ) and i put only 1 stick in "2" nothing 1 in slot "3" nothing both back in "1" and '2" nothing .. edit : just now i changed the position to "3" and "4" and still same problem

You were right ram was the problem now i have it one in slot "3" and one in slot "2" and it worked