CPU Fan Error!

[therapy]

Yesterday I mounted a nzxt kraken x73 and after I power on the pc I get an error. I premise that the pump cable I put it on D ( see picture ) while the hub I connected it on E&B but the error continues.

 

modo: ASUS ROG STRIK B550-A GAMING

[johnt]

I can't tell if you made a type or what. You say you plugged the fans into E&B, but I suspect your motherboard is giving you the error message because port A is empty. You can probably just disable it in BIOS as long as the fans are spinning on your cooler. Disabling it will help you get past the error code and boot into the OS.

[Sjaakie]

What hub? Connecting the fans on the CPU_FAN header with a 3 way splitter should do it.

[cooky560]

1 hour ago, johnt said:

I can't tell if you made a type or what. You say you plugged the fans into E&B, but I suspect your motherboard is giving you the error message because port A is empty. You can probably just disable it in BIOS as long as the fans are spinning on your cooler. Disabling it will help you get past the error code and boot into the OS.

This is why I have the pump in the cpu_fan header with it set to 100% constant, that way I'll get an error if the pump dies.

[therapy]

I solved it. I put the splitter for the x73 fans on A.