Pc cooling issue

[AllTattersNoBrains]

I am having some cooling issue with my PC. I've watched the thermals on a couple games. On cyberpunk my CPU gets to 90° and GPU gets to Upper 80s. On Destiny the CPU and GPU get to the upper 80s. My fans will randomly go to full blast and get real loud. The fans are generic Amazon ones that I saw in Jayz video. I have a 5950x with a 360 Cooler Master AIO  on it, 3090 FTW3, and a 011 with the fans in the back and bottom pushing in and the fans on the top pushing out with the Aio. Also my monitor is Odyssey 9 Neo. Any suggestions would be great.

 

Thank you. 

[Bob__]

Are you ok to undervolt?

[NorKris]

what is the room temp?  what about fan speed?  pic of system?

[AllTattersNoBrains]

2 hours ago, NorKris said:

what is the room temp?  what about fan speed?  pic of system?

I tested when the fans got loud and the cpu was at 90, gpu was 84. Gpu fans got to 3000rpm and the case fans got to 2300rpm. I downloaded Fan controller and it couldn't read all case fans but one of them said it was at that speed. Room was 75 but it happens even if the room is cooler. 

Edited June 1, 2023 by AllTattersNoBrains

[AllTattersNoBrains]

3 hours ago, Bob__ said:

Are you ok to undervolt?

I am OK with that. 

[AllTattersNoBrains]

I bought the gpu used. In the original pictures it was really dusty. They did clean it out but maybe I should take it apart and give it a deep clean. 

[NorKris]

indication of the pump being on is light in the logo,  did u do anything with it?

[AllTattersNoBrains]

7 hours ago, NorKris said:

indication of the pump being on is light in the logo,  did u do anything with it?

I customize the light. It does turn on. 

[NorKris]

10 minutes ago, AllTattersNoBrains said:

I customize the light. It does turn on. 

oki , what is the pump speed?  

i would point out that the room temp is VERY close to pc HW temp 

 

 

[AllTattersNoBrains]

7 hours ago, NorKris said:

oki , what is the pump speed?  

i would point out that the room temp is VERY close to pc HW temp 

 

 

I forgot I had a remote for my fans lol. I turned up the speed on them. It brought my CPU down to the '70s. It's louder but working. I think I'm going to just buy some better fans and clean out and repaste the GPU.

[NorKris]

18 minutes ago, AllTattersNoBrains said:

I forgot I had a remote for my fans lol. I turned up the speed on them. It brought my CPU down to the '70s. It's louder but working. I think I'm going to just buy some better fans and clean out and repaste the GPU.

thats under room temp 

[IkeaGnome]

Are you giving your room temperature and component temperatures in Fahrenheit, or are you doing F for room temp, and Celsius for component temp?

[AllTattersNoBrains]

On 6/2/2023 at 5:44 PM, IkeaGnome said:

Are you giving your room temperature and component temperatures in Fahrenheit, or are you doing F for room temp, and Celsius for component temp?

I was using F for room and C for components. 

[NorKris]

3 hours ago, AllTattersNoBrains said:

I was using F for room and C for components. 

aha, keeping it to the same  messurement is kinda  king 

 

do have  hwmonitor or hwinfo64?

[AllTattersNoBrains]

1 hour ago, NorKris said:

aha, keeping it to the same  messurement is kinda  king 

 

do have  hwmonitor or hwinfo64?

I use hwinfo64. 

[NorKris]

6 hours ago, AllTattersNoBrains said:

I use hwinfo64. 

nica, can we get a pic of it after load?

[AllTattersNoBrains]

On 6/9/2023 at 1:17 AM, NorKris said:

nica, can we get a pic of it after load?

 

[NorKris]

142w  and 89c, thats too "good" for  pump is not running. 

but bad mount or somthing with thermalpaste is posible, 

 

Radiator as intake is also king

[AllTattersNoBrains]

3 hours ago, NorKris said:

142w  and 89c, thats too "good" for  pump is not running. 

but bad mount or somthing with thermalpaste is posible, 

 

Radiator as intake is also king

I got some new thermal paste (Artic mx-6) for the CPU and GPU. I'll make sure the CPU mount is good. I wanted to put some new on the GPU and clean it out because I'm pretty sure the previous owner used it for mining and the original picture was pretty dusty. They did get a lot of the dust out but, I just want to give it a deep clean.