HyperX Quadcast normal / S detected as "USB Advanced Audio Device" Solution - FIX

[Artyk]

Hi,
to whoever is being afflicted by this (as myself), a dude found the solution.

Show some love to: CREDITS TO THIS GUY YT VIDEO  (its in spanish tho) 

Disclaimer: Do at your own risk, as this is flashing your device it could brick it completely.
(I really doubt it but I wont take any responsability lol)

Step 1: Download 
HyperX_eeprom.zip

Step 2: Go to device manager
Look under audio devices "Microphone (USB Advanced Audio Device)"


Step 3: Right click said device --> Properties --> Details --> Select in "Property" dropdown "Primary" option.
Get VID and PID. Probably are the same as image below (0d8c and 016c respectively, but would check yours anyway just in case)


Step 4: Uncompress HyperX_eeprom.zip
Open HyperX_config.exe
Fill the data (and if you get an error of not found, connect it to USB 2.0, I had that error and that solved it)



Step 5: Once you hit "Connect" and it does connect properly, just in case, select EEPROM -> FILE to backup your current state.

Step 6: Once backup is done. Select File -> EEPROM and select whichever *.bin file corresponde to your device.
(HyperX_QuadCast.bin for normal version - RED only light
or
HyperX_QuadCast_S_(RGB).bin for the S version, which is RGB)

Once done, It will prompt a reconnect.

Aaaand thats it, enjoy your device again.

Edited March 19, 2023 by Artyk
Imaged didnt upload for some reason

[alexmazur]

I've been struggling with this for +1 year, and this method totally solved my issue, Thanks a lot!