Jump to content

I plugged everything and run it,it was fine and working except Graphic Card.The display output from GPU is not working so I have to change to Motherboard(Changed from BIOS and tested,still no change).So,I've booted my Win 7 and installed some drivers(Motherboard drivers and stuffs).I can't run GPU Driver(came with box)It said "can't find compatible hardware".So I thought it was driver problem and I downloaded new driver for my card from Nvidia website and still having the same problem.My card is not showing in Device Manager and I can't get display output from my card too.So I thought it was card problem so i took it out and keep it for return to shop for exchange and leave my rig as it is without GPU n display output plugged to Mobo output.At that night I was going to open n install some software and it doesn't open at all.Lights on Hero Motherboard such as Start n Reset are lighted as it is and I can't start my pc(by pressing start from Case or that start button on Board).

What problem could this be???? PSU??? Motherboard??? (I think it's not GPU problem now :S ) I've read PSU testing thread but I don't understand how to do that testing :(.

<For GPU problem.....The led on GPU is green(Power Connector are securely attached)GPU is inserted into the board perfectly>


 
Spec List
CPU - i7 4770
CPU Cooler - Crosair H60
Motherboard - ASUS Maximus VI Hero
GPU - ASUS GTX 770 Direct CUII 2GB
HDD - WD 1TB
SSD - Kingston 60GB
RAM - Kingston 8GB HyperX
PSU - Crosair VS650

Link to comment
https://linustechtips.com/topic/143940-does-anyone-have-any-idea/
Share on other sites

Link to post
Share on other sites

i feel sorry for you its not nice troubleshooting when you build a pc mine was a struggle with a bad psu and ram issue

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to post
Share on other sites

20pin24pinconnectoroe2.jpg

 

For testing the PSU

1.Unplug the PSU from wall

2.Plug in like fan or something

3. Make a jumper from lets say paper clip and connect the Green(Power) with any black(Ground). 

4. Plug the PSU in a hit the switch, fan should start to spin. (And for love of god don´t touch the paper clip :D)

 

It is possible that the fan doesn´t start spinning because some PSU´s need some type of consumption.

But you can give it a try :)

My modded Air 540 build

Spoiler

 

 

Link to post
Share on other sites

20pin24pinconnectoroe2.jpg

 

For testing the PSU

1.Unplug the PSU from wall

2.Plug in like fan or something

3. Make a jumper from lets say paper clip and connect the Green(Power) with any black(Ground). 

4. Plug the PSU in a hit the switch, fan should start to spin. (And for love of god don´t touch the paper clip :D)

 

It is possible that the fan doesn´t start spinning because some PSU´s need some type of consumption.

But you can give it a try :)

Thanks to you.I've tested and PSU is working...I plugged only CPU n Motherboard n tested,the board is not running.Can this be motherboard problem????

Link to post
Share on other sites

Thanks to you.I've tested and PSU is working...I plugged only CPU n Motherboard n tested,the board is not running.Can this be motherboard problem????

 

It probably is, do you have a way to test if the CPU and RAM modules are ok ?

My modded Air 540 build

Spoiler

 

 

Link to post
Share on other sites

I plugged everything and run it,it was fine and working except Graphic Card.The display output from GPU is not working so I have to change to Motherboard(Changed from BIOS and tested,still no change).So,I've booted my Win 7 and installed some drivers(Motherboard drivers and stuffs).I can't run GPU Driver(came with box)It said "can't find compatible hardware".So I thought it was driver problem and I downloaded new driver for my card from Nvidia website and still having the same problem.My card is not showing in Device Manager and I can't get display output from my card too.So I thought it was card problem so i took it out and keep it for return to shop for exchange and leave my rig as it is without GPU n display output plugged to Mobo output.At that night I was going to open n install some software and it doesn't open at all.Lights on Hero Motherboard such as Start n Reset are lighted as it is and I can't start my pc(by pressing start from Case or that start button on Board).

What problem could this be???? PSU??? Motherboard??? (I think it's not GPU problem now :S ) I've read PSU testing thread but I don't understand how to do that testing :(.

<For GPU problem.....The led on GPU is green(Power Connector are securely attached)GPU is inserted into the board perfectly>

Spec List

CPU - i7 4770

CPU Cooler - Crosair H60

Motherboard - ASUS Maximus VI Hero

GPU - ASUS GTX 770 Direct CUII 2GB

HDD - WD 1TB

SSD - Kingston 60GB

RAM - Kingston 8GB HyperX

PSU - Crosair VS650

I had something like this a while back for Me it was the PSU, I would have to tear my computer apart a couple of times before it would click and power on then it just ran and this worked for a few months but a few months down the line the PSU just gave up and fizzled.

Why do you always die right after I fix you?

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×