New CPU and MOBO

[Mooneze]

Hi folks,

 

Recently I've got a new motherboard and CPU.

 

My PC turns on (fans are spinning), but there's no display.

My monitor works 100%.

 

What I have got:

 

MOBO: Aorus B550 Elite AX V2
CPU: AMD Ryzen 5 5600X
GPU: Geforce RTX 2060 Ventus 
RAM: Corsair CMW16GX4M2A2666C16 (2X8GB 2666MHz0
Power supply: Corsair TX 750M
Disk: Samsung 860 QVO 1 TB SATA MZ-76Q1T0

 

I honestly do not know what is going on. I feel like I tried everything. 

 

Any ideas?
Thanks

[Lurick]

Is there a POST code or beep code?

Is the monitor plugged into the GPU?

[DEADPOOLSMOM]

10 minutes ago, Mooneze said:

Hi folks,

 

Recently I've got a new motherboard and CPU.

 

My PC turns on (fans are spinning), but there's no display.

My monitor works 100%.

 

What I have got:

 

MOBO: Aorus B550 Elite AX V2
CPU: AMD Ryzen 5 5600X
GPU: Geforce RTX 2060 Ventus 
RAM: Corsair CMW16GX4M2A2666C16 (2X8GB 2666MHz0
Power supply: Corsair TX 750M
Disk: Samsung 860 QVO 1 TB SATA MZ-76Q1T0

 

I honestly do not know what is going on. I feel like I tried everything. 

 

Any ideas?
Thanks

Did you update the bios? Not all b550 support ryzen 5000 out of the box 

[Lurick]

Just now, Ryan829 said:

Did you update the bios? Not all b550 support ryzen 5000 out of the box 

I was thinking about that but wasn't B550 launched with the (non-G) 5000 series? I know X570 came out with the 3000 though but thought B550 was delayed and didn't come out until the 5000 series launched or maybe that's something else, in which case then the motherboard box needs to say Ryzen 5000 series compatible on it or a BIOS update is needed first.

[DEADPOOLSMOM]

1 minute ago, Lurick said:

I was thinking about that but wasn't B550 launched with the (non-G) 5000 series? I know X570 came out with the 3000 though but thought B550 was delayed and didn't come out until the 5000 series launched or maybe that's something else, in which case then the motherboard box needs to say Ryzen 5000 series compatible on it or a BIOS update is needed first.

Nope. It needs a bios update. I used to have a 5800x with b550 unify. I had to use bios flashback to update to latest bios before it posted 

[Lurick]

Just now, Ryan829 said:

Nope. It needs a bios update. I used to have a 5800x with b550 unify. I had to use bios flashback to update to latest bios before it posted 

Ok, cool, must have confused with something else then, thanks for that

[Mooneze]

Not a POST code, beep code either. 

Yes, DP is connected to GPU. 

 

I didn't update a bios. On box it says that it's AMD Ryzen 5000 desktop ready.

Thanks 

[DEADPOOLSMOM]

8 minutes ago, Lurick said:

I was thinking about that but wasn't B550 launched with the (non-G) 5000 series? I know X570 came out with the 3000 though but thought B550 was delayed and didn't come out until the 5000 series launched or maybe that's something else, in which case then the motherboard box needs to say Ryzen 5000 series compatible on it or a BIOS update is needed first.

Edit, quoted wrong person.

[DEADPOOLSMOM]

22 minutes ago, Mooneze said:

Hi folks,

 

Recently I've got a new motherboard and CPU.

 

My PC turns on (fans are spinning), but there's no display.

My monitor works 100%.

 

What I have got:

 

MOBO: Aorus B550 Elite AX V2
CPU: AMD Ryzen 5 5600X
GPU: Geforce RTX 2060 Ventus 
RAM: Corsair CMW16GX4M2A2666C16 (2X8GB 2666MHz0
Power supply: Corsair TX 750M
Disk: Samsung 860 QVO 1 TB SATA MZ-76Q1T0

 

I honestly do not know what is going on. I feel like I tried everything. 

 

Any ideas?
Thanks

You need to update your bios OP. I just double checked. B550 Launched June 16th, 2020. Ryzen 5000 launched November 5th 2020. Your specific board launched with it's first bios on August 7th 2020. The first bios for your motherboard compatible with ryzen 5000 was launched on September 18th 2020. The latest bios for your board launched on February 16th, 2022. I would flash that latest bios. Thankfully, that board DOES have bios flashback, so you won't need to borrow a zen 2 cpu to flash the bios. All you need is a USB stick and another PC. Let me know if you need any help. I am 99% sure that's your issue 

[DEADPOOLSMOM]

4 minutes ago, Mooneze said:

Not a POST code, beep code either. 

Yes, DP is connected to GPU. 

 

I didn't update a bios. On box it says that it's AMD Ryzen 5000 desktop ready.

Thanks 

That doesn't necessarily mean anything. The bios might not have been updated. Update the bios and report back

[DoubleCheese]

36 minutes ago, Mooneze said:

Hi folks,

 

Recently I've got a new motherboard and CPU.

 

My PC turns on (fans are spinning), but there's no display.

My monitor works 100%.

 

What I have got:

 

MOBO: Aorus B550 Elite AX V2
CPU: AMD Ryzen 5 5600X
GPU: Geforce RTX 2060 Ventus 
RAM: Corsair CMW16GX4M2A2666C16 (2X8GB 2666MHz0
Power supply: Corsair TX 750M
Disk: Samsung 860 QVO 1 TB SATA MZ-76Q1T0

 

I honestly do not know what is going on. I feel like I tried everything. 

 

Any ideas?
Thanks

maybe you need to check your cpu or power supply

[Mooneze]

1 hour ago, Ryan829 said:

That doesn't necessarily mean anything. The bios might not have been updated. Update the bios and report back

Thank you for the suggestion!

 

I extracted a file called B550AEV2.15a on my Pendrive. When I turn on my pc, I am not really sure what to do. I click ESC on my keyboard/ Q-flash button on MOBO, but nothing is happening.

[DEADPOOLSMOM]

1 minute ago, Mooneze said:

Thank you for the suggestion!

 

I extracted a file called B550AEV2.15a on my Pendrive. When I turn on my pc, I am not really sure what to do. I click ESC on my keyboard/ Q-flash button on MOBO, but nothing is happening.

 

[Mooneze]

2 hours ago, ImSan said:

maybe you need to check your cpu or power supply

CPU is new, I checked the pins as well.

 

Any suggestion with the power supply? Thanks.

 

1 hour ago, Ryan829 said:

 

 

Thank you for that video!

 

I did everything just like in that video. I think it installed new BIOS cause the led was flashing and then turned on everything connected to the motherboard (it did not reboot, though). 

 

Unfortunately, still no display.
 

[DEADPOOLSMOM]

23 minutes ago, Mooneze said:

CPU is new, I checked the pins as well.

 

Any suggestion with the power supply? Thanks.

 

 

Thank you for that video!

 

I did everything just like in that video. I think it installed new BIOS cause the led was flashing and then turned on everything connected to the motherboard (it did not reboot, though). 

 

Unfortunately, still no display.
 

Make sure the 8 pin EPS cable (the one by the CPU) is plugged all the way in and facing the correct direction. Also check the psu side to make sure all cables are fully plugged in. Also reseat the ram and try booting with one stick. 

[Mister Woof]

Reseat memory 

[Mooneze]

6 hours ago, Ryan829 said:

Make sure the 8 pin EPS cable (the one by the CPU) is plugged all the way in and facing the correct direction. Also check the psu side to make sure all cables are fully plugged in. Also reseat the ram and try booting with one stick. 

 

6 hours ago, Shimmy Gummi said:

Reseat memory 

 

I have no idea how did I miss that.

 

One of my ram doesn't work. Once I left, only one, the computer turned on.

 

Thanks everyone for the help! You are all legends.