future computer

[TheSpokySkull]

1 minute ago, Jonathan Lee said:

You don't have to, it will generally be better though

 

You could also considering using an iGPU and buy a dedicated GPU later. Saves some money for the time being.

integrated gpu's are pretty bad compared to dedicated ones.

[TheSpokySkull]

24 minutes ago, Fasauceome said:

ok, I made a budget parts list on pcpartpicker that you might consider:

 

PCPartPicker Part List: https://ro.pcpartpicker.com/list/tNz3rr

CPU: Intel Core i3-10100F 3.6 GHz Quad-Core Processor  (411.89RON @ PC Garage) 
Motherboard: Gigabyte B460M GAMING HD Micro ATX LGA1200 Motherboard  (389.39RON @ PC Garage) 
Memory: G.Skill Ripjaws V 16 GB (2 x 8 GB) DDR4-3600 CL18 Memory  (382.19RON @ PC Garage) 
Storage: Kingston A2000 500 GB M.2-2280 NVME Solid State Drive  (272.30RON @ PC Garage) 
Case: Deepcool MATREXX 30 MicroATX Mini Tower Case  (197.54RON @ PC Garage) 
Power Supply: be quiet! System Power 9 500 W 80+ Bronze Certified ATX Power Supply  (317.79RON @ PC Garage) 
Total: 1971.10RON
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2021-09-13 23:12 EEST+0300

 

I think the budget gives room for a cheap graphics card. I chose this DDR4-3600 because it was cheap, even though your motherboard will make it run at 2666.

 

With this list, you have room to upgrade and hopefully leftover money for the GPU.

 

by the way:

 

 

you don't have to respond a lot of times, since this is not an instant message forum. you can edit posts and multi-quote.

https://www.cel.ro/procesoare/procesor-intel-core-i3-10105f-3-7ghz-comet-lake-socket-1200-box-pNSQ3Nz0vMQ-l/#wait

 

https://www.cel.ro/carcase/carcasa-gamemax-starlight-black-frgb-negru-pMioxMDwtNA-l/

 

https://www.cel.ro/placi-de-baza/placa-de-baza-msi-b460m-pro-socket-1200-pMiE0NDIpNw-l/#wait

 

https://www.cel.ro/hard-disk-uri/hdd-seagate-barracuda-1tb-7200rpm-sata3-64mb-pMiYwNjwv-l/#wait

 

https://www.cel.ro/ssd-uri/ssd-crucial-p5-250gb-pci-express-3-0-x4-m-2-2280-pMiczMDUtMQ-l/#wait

 

https://www.cel.ro/surse/sursa-modulara-corsair-tx550m-550w-80-pluss-gold-pNSI0PTYs-l/?gclid=EAIaIQobChMI0ubKzb_68gIVzNPtCh1AdwBUEAQYAiABEgI85_D_BwE

 

https://www.cel.ro/memorii/kit-memorie-team-group-delta-2-x-8gb-ddr4-2666mhz-cl15-black-rgb-pMCYxNjYpPw-l/

 

https://www.cel.ro/pasta-termoconductoare/pasta-termoconductoare-arctic-silver-as5-3-5-grame-pNiMxPDY-l/

 

 later upgrades:

https://www.pcgarage.ro/coolere/id-cooling/frostflow-240-red/

 

 

[Fasauceome]

1 hour ago, immacat said:

ok i will not respond a lot of times sorry.and also i3-10100F it's not beating I3-10105F and it's cheaper and the ram 3600mhz has delay and CL18 doesn't look to good atleast cl16 i would prefer

cas latency is based on frequency, 3600 CL18 has the same as 3200 CL16. The motherboard would likely run it at something like 2666 CL 14, depending on the XMP profiles available.

[TheSpokySkull]

7 minutes ago, Fasauceome said:

cas latency is based on frequency, 3600 CL18 has the same as 3200 CL16. The motherboard would likely run it at something like 2666 CL 14, depending on the XMP profiles available.

3600mhz has higher delay than 3200mhz and cl16 it's good but upper no and i will run at 2666mhz max.cl stands for CAS latency  and its an indication of the time it takes for your memory controller to get a particular piece of data ready to access from the RAM