hardware Radiator screws for push pull

[Acclanugget]

Newbie help. Anyone know whats the exact screws I need to do a push pull rad fan setup? One sets of screws needs to be longer to accommodate the case and washer thickness. Anyone know whats the name of pc radiator screws and whatnot. 

 

Thanks in advance

[tkitch]

check your rad specifically, but a number use M4 screws.  (4MM)

You'd want 30-35mm lengths for a fan + case + washers

[narrdarr]

it depends some are m4, m3, or 6/32. and as said standard length is 30 to 32mm, but is can be longer or shorter depending on on the thickness of the fan and washers

[Acclanugget]

17 hours ago, tkitch said:

check your rad specifically, but a number use M4 screws.  (4MM)

You'd want 30-35mm lengths for a fan + case + washers

Thanks! This was really helpful 

[Acclanugget]

15 hours ago, narrdarr said:

it depends some are m4, m3, or 6/32. and as said standard length is 30 to 32mm, but is can be longer or shorter depending on on the thickness of the fan and washers

Thanks! Ill look into this