DRAM ERROR PC won't post

[Lukeo]

MB: gigabyte Vision G z590-A Prime

CPU- i7-11700K

PSU- Asus ROG 850G 

RAM- Corsair Vengeance RGB Pro SL 4x8GB 3600Mhz DDR4

 

I have checked the CPU for Bent pins-none

I have tried single modules in A2 B2 A1 B1 I have tried a different module of LPX 1x8gb 3000Mhz 

I have done a CMOS clear 

 

I cannot get the PC to POST 

I am unclear on the BIOS version as this is a brand new build. 

 

Help me please 

 

[Lord Nicoll]

19 minutes ago, Lukeo said:

MB: gigabyte Vision G z590-A Prime

CPU- i7-11700K

PSU- Asus ROG 850G 

RAM- Corsair Vengeance RGB Pro SL 4x8GB 3600Mhz DDR4

 

I have checked the CPU for Bent pins-none

I have tried single modules in A2 B2 A1 B1 I have tried a different module of LPX 1x8gb 3000Mhz 

I have done a CMOS clear 

 

I cannot get the PC to POST 

I am unclear on the BIOS version as this is a brand new build. 

 

Help me please 

 

If nothing works in it it's possible the board or CPU are DOA (dead on arrival), it's rare but does happen from time to time. Have you got any other memory sticks to test it with?

[Lukeo]

2 minutes ago, Lord Nicoll said:

If nothing works in it it's possible the board or CPU are DOA (dead on arrival), it's rare but does happen from time to time. Have you got any other memory sticks to test it with?

I have tested it with alternate memory modules and it's the same result 

[Lord Nicoll]

On 8/26/2021 at 1:37 PM, Lukeo said:

I have tested it with alternate memory modules and it's the same result 

Sorry for the belated reply, I'm afraid the best course of action is to send both back and state that either or both might be faulty, that's easier if you bought from the same shop as they can then easily process the RMA internally for the defective part, if you haven't already done so