My ram/cpu causes problems

[Teunvdhanenberg]

I thought i had problems with my old ram because the LED lit up and it wasnt booting.

 

now i bought 4x8 32Gb G skill and it still doesnt boot the memOK led lights up and the Dram led lights up.

there is no display but all the fans are spinning.

 

it only boots when i put in 1 or 2 ram sticks and leave the rest out

 

specs:

i7 8086k 

gtx 1080 msi sea hawk

z390-F asus

32 Gb g skill 

platinum corsair psu 800w

512GB samsung 980 m.2

 

to be honest i dont know where to start trouble shooting

[LauriHimself]

1 minute ago, Teunvdhanenberg said:

to be honest i dont know where to start trouble shooting

• reset cmos
• try only one stick, in one slot at a time to see if there is a bad slot
• try only one module, one after the other in a known good slot to see if there is a bad module
• pls tell us the spec of your ram kit. mhz, cl...

[Teunvdhanenberg]

3 minutes ago, LauriHimself said:

• reset cmos
• try only one stick, in one slot at a time to see if there is a bad slot
• try only one module, one after the other in a known good slot to see if there is a bad module
• pls tell us the spec of your ram kit. mhz, cl...

I already tried cmos reset

 

specs new set:

G skill TridentZ rgb

4x 8Gb

2400 mhz

cl15-15-15-35

1.2v

 

old set:

Ballistix 

2x 4Gb

2666mhz

cl16-18-18-38

1.2V

 

Im going to check all the slots now.

the TridentZ set is about 3 days old now.

[Teunvdhanenberg]

Ok it seems like the 3rd and 4th slot are not working when i put a single ram stick in them and try to boot.