No display?

[RhymeGG]

Hey, just swapped out my old x570 board to a b450 because x570 I broke, and with a new processor 3200g and 2060 everything turns on but I get no display! Any ideas??

[mr fobs]

Have you tried plugging into both your motherboard and GPU? You processor has an igpu so it should work from the MoBo.

[RhymeGG]

Just now, mr fobs said:

Have you tried plugging into both your motherboard and GPU? You processor has an igpu so it should work from the MoBo.

Yes, and have tried taking gpu out and just running it off igpu 

[mr fobs]

Have you tried a different cord/input on your monitor? Does your pc start up? like do the fans spin and stay spinning?

[RhymeGG]

1 minute ago, mr fobs said:

Have you tried a different cord/input on your monitor? Does your pc start up? like do the fans spin and stay spinning?

I will try different monitor with display port, and yeah everything stays running

[RhymeGG]

8 minutes ago, mr fobs said:

Have you tried a different cord/input on your monitor? Does your pc start up? like do the fans spin and stay spinning?

Display port is a no on the gpu, motherboard dosnt have one

[mr fobs]

Just now, RhymeGG said:

Display port is a no on the gpu, motherboard dosnt have one

does the motherboard have any other port you could try just for testing?

[RhymeGG]

4 minutes ago, mr fobs said:

does the motherboard have any other port you could try just for testing?

Dvid, trying to find that cable rn

[RhymeGG]

21 minutes ago, mr fobs said:

does the motherboard have any other port you could try just for testing?

Can’t find the cable rn, any other ideas?

[mr fobs]

Plugging into the motherboard would rule out it being a gpu issue. To me is sounds like a bad motherboard or bad connection somewhere. It could also be the cpu if that is also new.

[RhymeGG]

4 minutes ago, mr fobs said:

Plugging into the motherboard would rule out it being a gpu issue. To me is sounds like a bad motherboard or bad connection somewhere. It could also be the cpu if that is also new.

It is new, but If the system turns on usually means cpu is fine? And motherboard is brand new also so could be that, but it gives everything power, I’m just getting no display

[mr fobs]

Can you posy a clear picture of the inside of your case? I'd like to see the inside and see how everything is set up

[RhymeGG]

5 hours ago, mr fobs said:

Can you posy a clear picture of the inside of your case? I'd like to see the inside and see how everything is set up

 

[mr fobs]

Okay so a few things I wanna check

1. Your M.2 slot is empty and so are your SATA ports, is there an M.2 on the back that is filled? If no, you may try moving it to the front one.
2. If you haven't already, I would try disconnecting all of your extra cards and just booting with the one.
3. When you start your computer, are you shorting the pins on the motherboard to start it? or do you have a power plugged in because the picture shows that as not plugged in.
4. Try one of your other graphics cards and see if they work, that could also rule out a gpu issue.
5. Try the other 2 ram slots or one stick at a time.
6. Pull the CMOS battery and turn it on, power down, put battery back in and try again

Maybe one of these will work?