RAM XMP PROFILE HELP!!!!!

[SDC_x]

I need help with a problem i cant figure out.

 

Im trying to boost my RAM speed from the default 2133MHz to its retail max speed of 3200MHz but everytime i try to enable the XMP profile it doesnt boot and my pc indicates RAM Failure (3 beeps on trying to boot)

 

my PC specs are:

 

aourus x570 elite motherboard

ryzen 7 2700 CPU

corsair vengeance RGB pro 2x16GB CL16 3200MHz RAM

 

could someone preferably with the same MB help me out and suggest the exact settings that i need to change to boot my system with XMP?

[DoctorNick]

5 minutes ago, SDC_x said:

...

Did you put ram in slot A2 and B2? If yes, then the ram might not be compatible with auto XMP. Then download Aida64, go to motherboard tab -> SPD. Find the 3200Mhz profile with CL16. Extend the view and take a picture of the timings. Go to bios, set DRAM voltage to 1.35v, set frequency and timings manually according to the timings you just got. 

[SDC_x]

yes RAM is in A2 and B2. I will try what you suggested and hope that it works thanks.