bluescreen after fresh install help

[dreamcast4599]

so i formatted my ssd and installed windows 10 pro and i got a few bluescreens any ideas? was just browsing google so i have no ida what the issue is they seem to be driver related memtest86 as well as windows memory test and occt turn back no issues altho memtest96+  says all my ram is bad i doubt my ram is the issue since only 1 program can find errors also memtest 86+ finds them in the first 5 mins and yes i tested each stick one at a time

[Guest]

There is 4 newer bios files you can try for that board. Install recent chipset driver first.

 

Also, Fresh W10 install may need to be updated as well.

 

Update firmware and software and then do some testing again.

 

Good luck.

[emosun]

1 hour ago, dreamcast4599 said:

i doubt my ram is the issue since only 1 program can find errors

i dont think ive ever seen memtest actually come back with errors.... so yeah , somethings up with the memory. Try reseating it or try running the machine with only one stick and see if it stays stable. 

[dreamcast4599]

@emosun i ran memtest86+ with one stick and got the same error did the same for each of the 4 sticks same error seems odd that memtest86+ gives me memory errors while the standard memtest86 does not

[dreamcast4599]

@emosun also seems od that memtest86+ says all 4 sticks are bad i highly doubt all 4 sticks are bad

[emosun]

37 minutes ago, dreamcast4599 said:

 i ran memtest86+ with one stick and got the same error did the same for each of the 4 sticks same error seems odd that memtest86+ gives me memory errors while the standard memtest86 does not

 

1 hour ago, emosun said:

try running the machine with only one stick and see if it stays stable.

it's going to take a while to determine if the single stick is stable so run it with one stick in normal usage and see if that stabilizes the machine.

Also , when a machine has memory errors it determines either the memory OR the way the board is using the memory is faulty. so you may very well have either faulty memory or a faulty board. Luckly neither are too expensive to replace at the moment.

[dreamcast4599]

@emosun i have run 5 different memory test programs aida64,OCCT, memtest86 and memtest86+ seems odd that only memtest86+ is the one that finds errors in any case im gonna run my ram stock for a few days no docp no overclock no nothing just its base spd speed and see how it runs

[emosun]

6 minutes ago, dreamcast4599 said:

no overclock

was the machine being overclocked this whole time

[dreamcast4599]

@emosun no overclock only docp for my ram so im still stumped as i ran the system at stock aside from the ram which is 3733mhz ram

[emosun]

5 hours ago, dreamcast4599 said:

no overclock only docp for my ram so im still stumped as i ran the system at stock aside from the ram which is 3733mhz ram

ok so yes then it was being run with an overclock