Jump to content

CPU Upgrade question

Go to solution Solved by Jurrunio,
35 minutes ago, Vashta said:

 

Ok so upgrading it will work but I need to upgrade chipset drivers after I do the switch?

Chipset drivers before the switch. The new ones work with older CPUs as well.

Hey Guys and Gals,

 

Can a Ryzen 5 3600 be changed to a Ryzen 5 5600x without needing to reinstall windows?

 

I know my motherboard can handle it with current bios as can my Power supply and cooler.

I dont want to have to reinstall every program again.

 

Thanks in advance

Vash

Link to comment
https://linustechtips.com/topic/1340881-cpu-upgrade-question/
Share on other sites

Link to post
Share on other sites

yes upgrading wont be an issue as long as you have the right bios update that upgrades to at least AGESA 1.1.0.0, most manufacturers have given AGESA 1.2.0.0 on B450 and B550 I think and that works as well.

Make sure to quote me if you want me to respond
Thanks :)

Turn your Mobile VR or PSVR Headset into a working 6DoF SteamVR one guide/tutorial (below):

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

My PC

 

Link to comment
https://linustechtips.com/topic/1340881-cpu-upgrade-question/#findComment-14754458
Share on other sites

Link to post
Share on other sites

you do have to update the chipset driver first

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1340881-cpu-upgrade-question/#findComment-14754461
Share on other sites

Link to post
Share on other sites

35 minutes ago, Vashta said:

 

Ok so upgrading it will work but I need to upgrade chipset drivers after I do the switch?

Chipset drivers before the switch. The new ones work with older CPUs as well.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1340881-cpu-upgrade-question/#findComment-14754562
Share on other sites

Link to post
Share on other sites

1 minute ago, Jurrunio said:

Chipset drivers before the switch. The new ones work with older CPUs as well.

Hello,

 

Ok Thanks for the help and fast reply.

 

I will get new chipset drivers from ASRock B450 Steel Legend.

I only recall one set of install drivers from install disk but will check their site.

 

Thanks again for the help.

Vash

Link to comment
https://linustechtips.com/topic/1340881-cpu-upgrade-question/#findComment-14754570
Share on other sites

Link to post
Share on other sites

1 hour ago, Vashta said:

Hello,

 

Ok Thanks for the help and fast reply.

 

I will get new chipset drivers from ASRock B450 Steel Legend.

I only recall one set of install drivers from install disk but will check their site.

 

Thanks again for the help.

Vash

get chipset drivers from AMD instead, it would be more up-to-date and is not board specific anyway

 

https://www.amd.com/en/support

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1340881-cpu-upgrade-question/#findComment-14754744
Share on other sites

Link to post
Share on other sites

On 5/23/2021 at 4:21 PM, Jurrunio said:

get chipset drivers from AMD instead, it would be more up-to-date and is not board specific anyway

 

https://www.amd.com/en/support

Hello,

 

Ok thanks I will get them from AMD.

 

Have a great day and stay safe.

Vash

Link to comment
https://linustechtips.com/topic/1340881-cpu-upgrade-question/#findComment-14760014
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×