No Output.....pls help

[medyobano]

I was in the middle of trying to update my bios and was currently trying to see what my bios version was. I took a photo of in on my phone then saved and exited after, without touching anything else, including the M flash. After a few minutes, it would not boot up again. I tried pbysically turning the PC off but it would not. My only choice was to turn my power outlet off. When I tried booting it up again, still, no output. Help???

[WhitetailAni]

Did you interrupt or stop the BIOS flash?
If so, your motherboard is bricked.

[medyobano]

Just now, FakeKGB said:

Did you interrupt or stop the BIOS flash?
If so, your motherboard is bricked.

Nope, I did not even go to the tab of the bios flash. Was just gonna check the bios ver my mobo currently had. 

[medyobano]

Just now, medyobano said:

Nope, I did not even go to the tab of the bios flash. Was just gonna check the bios ver my mobo currently had. 

Everything btw still has power. The fans of the cpu cooler, gpu, and the pc fans are all working.

[Stahlmann]

Clear CMOS. (Look in your mobo manual on how to do it for your specific mobo)

[medyobano]

18 minutes ago, Stahlmann said:

Clear CMOS. (Look in your mobo manual on how to do it for your specific mobo)

I read about finding the JBAT1 on the mobo to jump it or something. I cant find. Could you guys help me out? I took the GPU out btw to make it clearer.

[medyobano]

3 minutes ago, medyobano said:

I read about finding the JBAT1 on the mobo to jump it or something. I cant find. Could you guys help me out? I took the GPU out btw to make it clearer.

Nvm, just found it. I apparantly do not have anything to do the CMOS since I dont have a jumper. What could I use as an alternative and how?

[Stahlmann]

6 minutes ago, medyobano said:

Nvm, just found it. I apparantly do not have anything to do the CMOS since I dont have a jumper. What could I use as an alternative and how?

That's the jumper. Just use a screwdriver and hold it in between the 2 pins to short them. Then hold it 10 seconds in place and your're done.

[medyobano]

31 minutes ago, Stahlmann said:

That's the jumper. Just use a screwdriver and hold it in between the 2 pins to short them. Then hold it 10 seconds in place and your're done.

Thanks for the help! Worked flawlessly. Was able to update my bios to the latest ver as well. Thanks!

[Stahlmann]

5 hours ago, medyobano said:

Thanks for the help! Worked flawlessly. Was able to update my bios to the latest ver as well. Thanks!

Lol actually had to do it tonight aswell. Just updated my BIOS for resizable BAR and suddenly got no post. Cleared CMOS and my system was working again.