Jump to content

windows installation loop

blur_blop
By blur_blop
in Troubleshooting
 Share
Posted

i am trying to install windows 10 from bootable usb drive to my pc an dafter completing windows setup pc restarts and start setup again,

 

i try to restart and same thing

i try to make first boot SSD and second USB same thing

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

PS: if i disable usb in boot menu and keep SSD one first boot only then it restart and enters to bios every time

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Have you tried to unplug the USB and booting?

 

Also, after changing the boot order, are you sure you have saved the settings?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, blur_blop said:

PS: if i disable usb in boot menu and keep SSD one first boot only then it restart and enters to bios every time

Have you checked the settings for CSM in the BIOS?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

after the install just pull the USB, that forces it to boot from the SSD.
Or hit f8 or f12 (for most mobos, can also be f10 or f11) for a bootmenu. A manual overwrite for that one boot

 

I make Rainmeter things and other art :D

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

After finishing i usually just choose the ssd/hdd whatever ONCE. And it usually just picks up from there. Only once it hasnt worked.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
19 minutes ago, Zongohihello said:

Have you tried to unplug the USB and booting?

 

Also, after changing the boot order, are you sure you have saved the settings?

i unplug the usb and restart it goes to bios setup (without pressing any key)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I've also had this problem in the past. Just install Windows, then wait until it AUTOMATICALLY restarts and then pull the USB when the screen is black. Then it will continue the windows setup as usual. Had this problem on 4 PC's and doing it like this solved it every time.

If someone did not use reason to reach their conclusion in the first place, you cannot use reason to convince them otherwise.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
55 minutes ago, Zongohihello said:

Have you checked the settings for CSM in the BIOS?

its on UEFI and Legacy OPROM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
15 minutes ago, Stahlmann said:

I've also had this problem in the past. Just install Windows, then wait until it AUTOMATICALLY restarts and then pull the USB when the screen is black. Then it will continue the windows setup as usual. Had this problem on 4 PC's and doing it like this solved it every time.

okay let me try this way

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 4/20/2021 at 3:13 PM, Wyzzy Moon said:

after the install just pull the USB, that forces it to boot from the SSD.
Or hit f8 or f12 (for most mobos, can also be f10 or f11) for a bootmenu. A manual overwrite for that one boot

 

just now i did the same you mentioned and after restart system enters into bios

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×