5.25 reservoir mounting

[Mclegendary]

So I've been looking at cases and one which I really like is the nzxt h440. The problem is I am using a water cooling kit which uses a 5.25 revervoir. Anyone have any mounting ideas?. (http://www.kustompcs.co.uk/acatalog/info_9391.html)

[tryphaa]

You can't do it. There are no 5.25 bays.

[UselessBread]

Duct tape?

[Mclegendary]

I could also go with a define r4 if the mounting would be easier. Would taping it to the floor of the case work?

[W-L]

Modify a mount for the reservoir or replace it with a tube reservoir?

 

170mm:

http://www.xs-pc.com/reservoirs/photon-170-tube-reservoir

 

270mm:

http://www.xs-pc.com/reservoirs/photon-270-tube-reservoir

[Kukielka]

Grab yourself a hacksaw and let your creativity flow, otherwise, pick another res / case.

[helping]

Solution is simple, either buy a different case or buy a different kit, or remove the reservoir and use a T line res.

[Mclegendary]

Anyone know any good non 5.25 res water cooling kits under $150? A link to where I can get it in the uk or europe would be helpful as well. It also needs to be compatible with AM3+ socket. I found a good phobya one except it was intel only.

[W-L]

Anyone know any good non 5.25 res water cooling kits under $150? A link to where I can get it in the uk or europe would be helpful as well. It also needs to be compatible with AM3+ socket. I found a good phobya one except it was intel only

Try aquatuning I found this one here might be of interest to you.

 

 http://www.aquatuning.co.uk/product_info.php/info/p2082_240er-Komplettset-12V-Laing-S--754-939-940-FX-Opteron-AM2-AM3.html