Jump to content

New Build Wont Post

Papa P
By Papa P
in Troubleshooting
 Share
Go to solution Solved by TylerDurden!,
28 minutes ago, Papa P said:

Is that the bios version?

yes, that is the version before 2606.  agesa 1.0.0.2.  You need to update your bios

Posted

Hi all,

 

I have an Asus ROG Strix X570-I Gaming Mini ITX motherboard with an AMD 5800x, Corsair Vengeance LPX 2x16gb 3600mhz, and EVGA 2080. When I finished building it and went to turn it on, it didn't post and the gpu fans were running at 100%. I checked the post lights and the dram right was lit up. So far I've reseated the ram several times, reseated the gpu, reseated the cpu, and ran 1 ram stick in each of the 2 slots. The ram should still be good since I was using it 2 days ago in my intel system that I am upgrading from. I contacted asus support and they said my ram wasn't listed on the compatible ram spec sheet (I'm calling major cap) and couldn't help me until I sourced compatible ram. My ram part number is CMK32GX4M2Z3600C18. Please help, I'd like to get back to gaming asap.

Asus Compatible Ram Spreadsheet:
https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_X570-I_GAMING/ROG_STRIX_X570-I_GAMING_AMD_5000_DDR4_Test_Report_20201116.pdf

Link to comment
https://linustechtips.com/topic/1284480-new-build-wont-post/
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Texas1836 said:

it depends, if it is intel special ram then it's probably not supported

On Corsair's website it says it's optimized for both AMD and Intel. I bought the ram and motherboard at the end of October.

 

https://www.corsair.com/us/en/Categories/Products/Memory/VENGEANCE-LPX/p/CMK32GX4M2D3600C18

Link to comment
https://linustechtips.com/topic/1284480-new-build-wont-post/#findComment-14325137
Share on other sites
Link to post
Share on other sites
Posted

Team T-Force XTREEM ARGB 16 GB (2 x 8 GB) DDR4-3200 CL14 Memory (TF10D416G3200HC14BDC01) - PCPartPicker

Corsair Vengeance RGB Pro 32 GB (2 x 16 GB) DDR4-3200 CL16 Memory (CMW32GX4M2Z3200C16) - PCPartPicker

G.Skill Trident Z Royal 16 GB (2 x 8 GB) DDR4-4400 CL18 Memory (F4-4400C18D-16GTRS) - PCPartPicker

Corsair Dominator Platinum RGB 16 GB (2 x 8 GB) DDR4-3600 CL18 Memory (CMT16GX4M2C3600C18) - PCPartPicker

You can copy paste the "vendor part numbers" on the data sheet in PC part picker.

Link to comment
https://linustechtips.com/topic/1284480-new-build-wont-post/#findComment-14325161
Share on other sites
Link to post
Share on other sites
Posted
  • Author
26 minutes ago, TylerDurden! said:

do you know what bios is on there?   I could be wrong, but I believe you should have at least the 2606 version with agesa 1.0.8.0

I'm not sure what bios is on it since I can't boot into bios and if I'm not mistaken I can't flash a new bios unless it posts.

 

EDIT: Based on the serial number sticker on the motherboard there is a 2407 number at the far right side. Is that the bios version that was loaded onto the board?

 

22 minutes ago, Breeksta said:

Team T-Force XTREEM ARGB 16 GB (2 x 8 GB) DDR4-3200 CL14 Memory (TF10D416G3200HC14BDC01) - PCPartPicker

Corsair Vengeance RGB Pro 32 GB (2 x 16 GB) DDR4-3200 CL16 Memory (CMW32GX4M2Z3200C16) - PCPartPicker

Thank you for the suggestions. If my friend's ram that is compatible works, I'll probably pick up that corsair ram you listed.

Link to comment
https://linustechtips.com/topic/1284480-new-build-wont-post/#findComment-14325182
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×