Fractal Case

[woody30]

So I'm considering putting an amd ryzen 7 3800x 105w tdp  and noctua NH d15s cpu cooler with corsair rm850 psu and Nvidia 2060 super and was wondering how the thermals would be in a fractal design 7 compact?

[kewtz]

With good airflow, should be fine.

Keep in mind this case is designed for quietness as a priority, so thermals may run a touch higher.

I have my build in the Design R4 and it was warm until I put the top fans in as exhaust, that made a big difference.

 

[WoodenMarker]

Cooling should be adequate with the stock case fans. 

[woody30]

10 hours ago, WoodenMarker said:

Cooling should be adequate with the stock case fans. 

Someone please help I'm in the process of transferring my computer over to new and I'm done but the fractal design case come with 3 pin connectors and cannot get them connected into 4 pin headers on Asus b550 f gaming wifi atx board 

[WoodenMarker]

14 minutes ago, woody30 said:

Someone please help I'm in the process of transferring my computer over to new and I'm done but the fractal design case come with 3 pin connectors and cannot get them connected into 4 pin headers on Asus b550 f gaming wifi atx board 

There's a notch to line up the headers. 

Spoiler

 

 

[woody30]

3 minutes ago, WoodenMarker said:

There's a notch to line up the headers. 

These grooves or slots on topare keeping it from going on connector how do I get past that

[WoodenMarker]

18 minutes ago, woody30 said:

These grooves or slots on topare keeping it from going on connector how do I get past that

Scroll up to my previous post and check out the additional image that shows how the notch lines up with the guides on the fan connector.

If you're trying to plug the fan into cha_fan3, make sure the guides are facing downwards at the psu shroud.

[woody30]

28 minutes ago, WoodenMarker said:

Scroll up to my previous post and check out the additional image that shows how the notch lines up with the guides on the fan connector.

If you're trying to plug the fan into cha_fan3, make sure the guides are facing downwards at the psu shroud.

Ok I was able to get it and thank you for quick response on my issue now I just to tidy up some cables and plug it into see if it works tomorrow