limits for rx 560

[Scroll_DP]

Hi, I have an ASUSrx 560, there is a TDC limit on it because I don't want to increase it too much. I'm just at TDP values: 70W, TDC 70A, power limit 70W. The clock is at 1380 mhz (default), for some games up to 1436 mhz (OC). The temperature is maintained at AVG 65 temp (C). The cooler is replaced by a new dual fan from artic. Yes, it pays off.

Is there a limit or something on TDC that is not exceeded?

[BTGbullseye]

I don't see a question here...

[SavageNeo]

you can increase the power and voltage limit, just keep the temps under 85c or so and you are fine

[Scroll_DP]

4 minutes ago, BTGbullseye said:

I don't see a question here...

I fixed the question

[Scroll_DP]

2 minutes ago, SavageNeo said:

you can increase the power and voltage limit, just keep the temps under 85c or so and you are fine

So even if I increase the TDC, nothing could happen if the temperature was, let's say, below 80 C?

 

[SavageNeo]

2 minutes ago, Davidek said:

So even if I increase the TDC, nothing could happen if the temperature was, let's say, below 80 C?

 

if the temps are under 80c it will be fine

 

where are you overcloking from? iverclock with msi afterburner. it is the easiest overlcoking software. just have to unlock voltage control in the settings

 

 

 

[Scroll_DP]

1 minute ago, SavageNeo said:

if the temps are under 80c it will be fine

 

where are you overcloking from? iverclock with msi afterburner. it is the easiest overlcoking software. just have to unlock voltage control in the settings

 

 

 

I am using AMD Radeon settings for oveclocking.

map perfomance

[BTGbullseye]

33 minutes ago, Davidek said:

I am using AMD Radeon settings for oveclocking.

And that is the best to use, don't believe anyone that says otherwise for AMD.

 

What driver version?

[Scroll_DP]

13 minutes ago, BTGbullseye said:

And that is the best to use, don't believe anyone that says otherwise for AMD.

 

What driver version?

before i had 20.4.2, i think, and now i have 20.8.3. 

I now, amd setting in overclock is best, its more stable than in other software.

[Scroll_DP]

and this is my current settings in polarisbioseditor and radeon setting tuning- this is profile for dying light.

19 minutes ago, BTGbullseye said:

And that is the best to use, don't believe anyone that says otherwise for AMD.

 

What driver version?

 

 

[BTGbullseye]

Looks like you also might not be getting the unlocked power limit you're trying for with that editor, just a thought.