[Help] RAID Volumes: None defined.

[_N0stalgic]

Hi guys, I was wondering if anyone could help me with this. I'm not quite sure what's the problem here because everything is working fine. Computer boots perfectly. Just that this screen appears before booting to Windows.

 

[xXxYOLOxSWAGxXx_420BlazeIt]

Set your SATA type to IDE or ACHI in your BIOS to stop it showing.

 

That is the Intel onboard RAID firmware. If you are having no problems, then I would just suggest leaving it alone.

[Altecice]

As said above that is the Legacy ROM mode that your mobo is using.

Basically it has to detect all disks in the array then load windows.

 

the new UEFI ROM does this on the fly and will hide the screen. no real difference IMO so just leave it alone.

[FlakeyBanana]

I'd say if its fine don't mess it it

[_N0stalgic]

Thanks for the reply guys. Just wanted to make sure that nothing is going wrong where I can't see it Shall leave it alone then ~