Problems with Asus' DOCP

[lordx4]

I just built a new rig and I am having major problems overlocking my RAM with Asus' DOCP profile.

Specs are:

Ryzen 5 3600

B450-F ROG STRIX

Corsair RGB Pro 16GB 3200Mhz

MSI 2070Super Ventus

Corsair 650M

 

So after a couple times trying to set the DOCP profile and not getting the 3200MHz I put everything on default at which point my computer crashed and I had to restore Windows in order for it to work. It was frastruating to say the least and I am wondering if it is the RAM causeing this problems and if I should return it. The RAM is currently running at 2133MHz and I don't want to touch the DOCP settings again in case it crashes.

Any advice on what to do?

 

Thank you in advance.

[Haro]

A couple of things 

Put the ram in slot 2 or 4 or whichever slot that allows you to use dual channel ( look at the manual ) 

Now 

Update the bios 

Set the soc to 1.1

Dram to 1.35 

Set it to 3200 

If it boots 

Use memtest86 and OCCT to verify that it's stable 

If you have any over clock remove it just to avoid FCLK limitations  ( not including XFR)

If it boots and you verified it's stable 

Set your over clock profile back again and check if it's stable 

Good luck

[lordx4]

7 minutes ago, TofuHaroto said:

A couple of things 

Set the ram in slot 2 or 4 or whichever slot that allows you to use dual channel ( look at the manual ) 

Now 

Update the bios 

Set the soc to 1.1

Dram to 1.35 

Set it to 3200 

If it boots 

Use memtest86 and OCCT to verify that it's stable 

If you have any over clock remove it just to avoid FCLK limitations  ( not including XFR)

If it boots and you verified it's stable 

Set your over clock profile back again and check if it's stable 

Good luck

Hey I just noticed that my Ryzen 3600 is running at around 4.2GHz but I haven't set anything up could you think of how?

[Haro]

Just now, lordx4 said:

but I haven't set anything up could you think of how?

4.2 is normal for a 3600 

Either way as I said if you have XFR don't worry about it 

Just do the things I listed above 

[lordx4]

37 minutes ago, TofuHaroto said:

4.2 is normal for a 3600 

Either way as I said if you have XFR don't worry about it 

Just do the things I listed above 

I did the tests and CPUZ says that it is running at 3200MHz.. Thank you so much. Will update you when I do the tests

[Haro]

Just now, lordx4 said:

Thank you so much. Will update you when I do the tests

No problem 

Good luck