GPU FAN FLUCTUATING

[dyl35]

I recently attached a NZXT G12 to my 2080 and connected a vga to pwm connector to be able to control and monitor the fan on the radiator for the GPU and NZXT's CAM software reports that the GPU fan speed is going from 800 to 1600 to 1200 to 2000 RPM in a matter of seconds but that's not true because I would be able to hear the difference in fan speeds if it were to actually go up to 2000 RPM. I've deleted a different software that was interfering with the fan control and just using Cam software for the CPU fan control, BIOS for the rest of the fans and then Aorus Engine for the GPU fan control because it is a Gigabyte card. I've set it to auto and that seems to make it silent and not fluctuate as much but setting it to manual to just 50% makes it flucate faster and louder and then setting a custom curve does the same. 

 

Note, while controlling the fan speed of the CPU through CAM, it does say that "Another program is attempting to communicate with your device" and it says it's NZXT CAM.exe and it said it twice and then I deleted the other program and now it still says it once but there are no other programs running that control fan speeds besides the ones listed.