Jump to content

it looks like you could lightly tap a torx bit in it, maybe even some vice grips, might not have enough vertical room though. its also in a decent spot to use a saw/grinder to create a slot for a flat head, or use a reverse drill bit to drill it out. be very careful with these methods if you haven't done them before, tons of YouTube videos on all these methods. there are others methods that would work as well, those are just the ones i use the most.

 

edit: also, kinda tough, but you may be able to go under the board with the right tool (small vice grips, locking forceps ect.), and try to unscrew the whole riser, and take it off easy with the board out. also, all of these methods are going to create metal shavings, so if you do, make sure they are all vacuumed out VERY well.

Link to comment
https://linustechtips.com/topic/1198556-i-need-help-about-mobo/#findComment-13636264
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×