Windows 10 boot insall loop (Help)

[GK2]

Hi everyone,

I got all my pc components today and put it all together. Thankfully it boot up perfectly. Then I go on to install windows from my usb and it goes as planned. Go through the whole process without any problems. Then when it goes to reboot to continue install it just takes me back to step 1. I have seen a million videos and posts saying they fixed this. I don't know what I am doing wrong or if there is anything I am missing. I would appreciate any and all help thanks in advanced.

[databreach]

Make sure you boot from your disk change boot order in the BIOS as you certainly did the first time to boot off the usb stick.

[GK2]

1 hour ago, databreach said:

Make sure you boot from your disk change boot order in the BIOS as you certainly did the first time to boot off the usb stick.

I don't know what order to boot things in I left as recommended. I have an m.2 ssd and a usb which has windows. I tried switching it around but had some isses.

[homeap5]

So use F12 key (if I good remember, or F11) after power on. It will display boot manager and you can select boot device.

[GK2]

26 minutes ago, homeap5 said:

So use F12 key (if I good remember, or F11) after power on. It will display boot manager and you can select boot device.

The picture I sent is just that. I don't know if I did it properly however.

[homeap5]

6 minutes ago, GK2 said:

The picture I sent is just that. I don't know if I did it properly however.

No, the picture you sent is your BIOS settings, not temporary boot selector.

[GK2]

1 hour ago, homeap5 said:

No, the picture you sent is your BIOS settings, not temporary boot

Thank you! I will tey this but right now my pc wont post and I dont know why

[GK2]

Fixed the problem! Ssd was not compatible with motherboard and for some reason it wouldn't install windows to ssd.