Jump to content

I currently have 2x8 gb 2666mhz ram from Corsair rgb pro vengeance, but I want to upgrade to a 64gb kit and I can’t work out if the price benefits of 2x(16x2) kits is better than 1x(4x16gb) kit. Speeds wise I’d have to go for 3200mhz if it was a 4x16 kit since on amazon it’s £398 compared to the £850 cost of a 3600mhz kit. However a dual kit of 2x16gb ddr4 3200 is only £174 and if I got 2 of them it would be cheaper than a quad kit, what’s better? Also bear in mind the prices are from rgb kits as I plan to move my pc to my desk at some point. Thanks

Link to comment
https://linustechtips.com/topic/1177686-dual-vs-quad-memory-kit/
Share on other sites

Link to post
Share on other sites

You won't see any difference from dual and quad kit, as you will run them in dual channel (pairs).

You can just buy 2 dual kit, even 4 singles if it's the same module why would it be different?

Ryzen 5700g @ 4.4ghz all cores | Asrock B550M Steel Legend | 3060 | 2x 16gb Micron E 2666 @ 4200mhz cl16 | 500gb WD SN750 | 12 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w

Link to post
Share on other sites

If you buy 2 dual kits rather than a quad, dont be surprised if they turns out to be unstable at 3200MHz and you cant RMA in this case because they arent verified to do that in quad stick config. This will mostly be a problem for 1st and 2nd gen Ryzen, 3rd gen should do just fine

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

1 minute ago, SupaKomputa said:

You won't see any difference from dual and quad kit, as you will run them in dual channel (pairs).

You can just buy 2 dual kit, even 4 singles if it's the same module why would it be different?

Ok cool thanks for the advice and I guess the £80 voucher on not buying a quad kit lol. Thanks

Link to post
Share on other sites

unless youre on TR there is no perf difference between dual and quad kits. Both will run in dual channel mode. Get the 2x Kit to have space for future upgrades

FOLDING MONTH 2021! GOGOGO and save on some heating costs 🙂

 

Link to post
Share on other sites

Just now, Jurrunio said:

If you buy 2 dual kits rather than a quad, dont be surprised if they turns out to be unstable at 3200MHz and you cant RMA in this case because they arent verified to do that in quad stick config. This will mostly be a problem for 1st and 2nd gen Ryzen, 3rd gen should do just fine

Ok I’m on a 3rd gen ryzen and my motherboard is dual I think.

Link to post
Share on other sites

5 minutes ago, Metallus97 said:

YUP. That can do quad channel and on the 32c and 64c quad is required to get the max perf.

Also while your here, if I get 2 dual channel kits at 3600mhz it would be the same as a quad while 2 dual at 3200mhz would be much cheaper. For my build would I notice a difference between 3200 and 3600?

Link to post
Share on other sites

2 dual is not equal as a quad. Your system will still run at dual channel. Only threadripper supports quad channel.

Ryzen 5700g @ 4.4ghz all cores | Asrock B550M Steel Legend | 3060 | 2x 16gb Micron E 2666 @ 4200mhz cl16 | 500gb WD SN750 | 12 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w

Link to post
Share on other sites

6 minutes ago, StepDice said:

Also while your here, if I get 2 dual channel kits at 3600mhz it would be the same as a quad while 2 dual at 3200mhz would be much cheaper. For my build would I notice a difference between 3200 and 3600?

wich CPU do you have? But even on ryzen 3 it would only be worth it for 10-20$. So yes it does impact perf but not by much.

FOLDING MONTH 2021! GOGOGO and save on some heating costs 🙂

 

Link to post
Share on other sites

3 minutes ago, Metallus97 said:

wich CPU do you have? But even on ryzen 3 it would only be worth it for 10-20$. So yes it does impact perf but not by much.

3700x, on amazon the 3600 dual kit is £50 more, but I could check other external site. Here’s one for a lot cheaper https://www.scan.co.uk/products/32gb-2x16gb-corsair-ddr4-vengeance-rgb-pro-black-pc4-28800-3600-non-ecc-unbuff-cas-18-135v-amd-ryzen it says it’s tuned but I assume that’s just Corsair tuning

Edited by StepDice
Link to post
Share on other sites

2 minutes ago, StepDice said:

3700x, on amazon the 3600 dual kit is £50 more, but I could check other external site.

alright. 50 is NOT worth it. As I said: for 10-20 more do it. Otherwise stick with the 3200

FOLDING MONTH 2021! GOGOGO and save on some heating costs 🙂

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×