Asrock b2 error code

[OnisteN]

Okay soo.... Yesturday i updated my bios everything was working fine. 

Today i got a new psu its cooler master v750. 

I connected everything properly. 

So now i run into an issue (error code b2) 

I tried reseating  the gpu 

I tried a differed pci-e

I tried a differend 6pin cable from psu

I reseted the cmos (removed the battery) 

Figured out that i can go to bios but there is no picture. 

The only thing i didn't do is flash my bios i mean roll it back to an old update.. 

I Don't have any other connector (only run hdmi) 

Please help. Thank you.. 

 

My mobo is asrock fatal1ty k4 gaming z470

Cpu ryzen 7 2700

Gpu is gtx 1060 from zotac amp edition

Ram 16 gb of kingston hyper x predator 3200 mhz

Psu cooler master v750

2 hdd's seagate baracuda guardian (both are 2 tb) 

 

[ObsidianAura]

Sounds like you've done all the right things.

 

My gut tells me the GPU isn't getting the power it needs, do the GPU's fans spin? Maybe you could try and get your old PSU plugged back in? Prop it up on books and just run the cables straight in so you don't mess up your cable management.

[OnisteN]

I thought about that, and i will do that but can't right now. Gpu is spinning, that i can confirm. Just hope my gpu isn't bricked . Thanks for advice. 

[OnisteN]

Ill make sure to keep you posted if i fix it. Ill give all the steps i did and how i resolved the issue for people that have a similar problem. 

[OnisteN]

Well i tried using a different psu same thing happened. Then i tried getting a new bios ver and it bricked my mobo

I went to uninstall my whole system and bent and broke of 1 of my pins drom my cpu so happy me i have. A bricked mobo and a bad cpu. 

[ObsidianAura]

14 minutes ago, OnisteN said:

Well i tried using a different psu same thing happened. Then i tried getting a new bios ver and it bricked my mobo

I went to uninstall my whole system and bent and broke of 1 of my pins drom my cpu so happy me i have. A bricked mobo and a bad cpu. 

Noooo! :'(