PC not waking up

[rbrowne11]

I can't seem to wrap my head around this so hopefully the internet can help.

 

My problem comes when I turn on my PC after being shutdown. Everything that should happen (fan spin, rgb, keyboard lights up) does and my monitors even wake up and realize the PC was turned on. After a few seconds the monitors go into sleep mode and say there is no display port input. I have tried clicking and wiggling the mouse and tapping on the keyboard as it seems the PC is sleeping. The way I get around this problem is holding the power button on the case until it turns off, then press the button again to turn it on and it works just fine. 

 

If anyone has suggestions, I would love to get around this mild inconvenience!

 

Running Windows 10 Home 64-bit version 1909

 

PCPartPicker Part List

CPU: AMD Ryzen 5 3600 3.6 GHz 6-Core Processor  ($194.13 @ Amazon) 
CPU Cooler: Corsair H100i 77 CFM Liquid CPU Cooler 
Motherboard: MSI B450 TOMAHAWK MAX ATX AM4 Motherboard  ($114.99 @ B&H) 
Memory: OLOy 32 GB (2 x 16 GB) DDR4-3200 Memory  ($119.99 @ Newegg) 
Storage: Western Digital Blue 1 TB M.2-2280 Solid State Drive  ($109.99 @ Amazon) 
Video Card: NVIDIA GeForce RTX 2060 SUPER 8 GB Video Card  ($399.99 @ Best Buy) 
Case: Phanteks P300 ATX Mid Tower Case  ($49.99 @ Newegg) 
Power Supply: Corsair RM (2019) 650 W 80+ Gold Certified Fully Modular ATX Power Supply  ($108.99 @ Newegg) 
Operating System: Microsoft Windows 10 Home OEM 64-bit  ($0.00) 
Monitor: Dell P2419HC 23.8" 1920x1080 60 Hz Monitor 
Monitor: Dell U2419HC 23.8" 1920x1080 55 Hz Monitor 
Total: $1098.07
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2020-01-10 10:47 EST-0500

 

[Stu_Bear]

Can you swap the hdmi cable from your graphics card to the onboard mobo hdmi port and try ?  Also, look in BIOS and see which hdmi output it's looking for first...I know on Intel boards you can point to either your card's or your mobo's...make sense?

[rbrowne11]

14 minutes ago, Stu_Bear said:

Can you swap the hdmi cable from your graphics card to the onboard mobo hdmi port and try ?  Also, look in BIOS and see which hdmi output it's looking for first...I know on Intel boards you can point to either your card's or your mobo's...make sense?

I looked in the bios and the wake up event was set to bios, from there I was able to enable using the keyboard input for wake up which appears to have solved the problem.