Jump to content

Bizzare boot problem

Whiro

So I was helping @Keal from our forum with his build after few problems he had with mobo before. Short story, pc is working now but there is some weird issue which I can’t think of possible fix solution. 
When ethernet cable is connected to the mobo there is vga light on the mobo light up and system is not booting, as soon as the cable is removed the pc boots. 
Anyone have some idea of fixing that??

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites

Link to post
Share on other sites

8A14A0F7-6CB3-4BEB-BB6F-DD97C0F3D84A.jpeg.61ebe488a9ec96daae18d3a6fc12e336.jpeg

could be worse.

 

in an attempt to be helpful:

It sounds like the machine is looking for a monitor on the ethernet.  If the ethernet is a pcie card it could be a Low level software thing.  My move would be to reflash the bios, but that’s probably already been done.

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

13 minutes ago, Bombastinator said:

in an attempt to be helpful:

It sounds like the machine is looking for a monitor on the ethernet.  If the ethernet is a pcie card it could be a Low level software thing.  My move would be to reflash the bios, but that’s probably already been done

Nah it wasn’t been done yet. And the ethernet port is on mobo not pcie card. 

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites

Link to post
Share on other sites

stupid questions first. lol.

 

Did you try a different cable?

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, ShrimpBrime said:

stupid questions first. lol.

 

Did you try a different cable?

Different dp cable or ethernet ?? ? No I don’t think he tried that. 

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites

Link to post
Share on other sites

Yea, he should try that. Maybe the cable is shorted or damaged one end or the other.

Link to comment
Share on other sites

Link to post
Share on other sites

34 minutes ago, Whiro said:

Nah it wasn’t been done yet. And the ethernet port is on mobo not pcie card. 

It’s possible the bios thinks the ethernet is the monitor for some reason. No cable in the ethernet port often turns it off so bios skips on by.

 

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, ShrimpBrime said:

Yea, he should try that. Maybe the cable is shorted or damaged one end or the other.

I’ll pass the msg to him to try it

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Bombastinator said:

It’s possible the bios thinks the ethernet is the monitor for some reason. No cable in the ethernet port often turns it off so bios skips on by.

 

Is there any way to skip that than ? B450 Tomahawk Max mobo btw

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, Whiro said:

Is there any way to skip that than ? B450 Tomahawk Max mobo btw

The only thing that came to my head was to plug the ethernet cable in unpowered.  Just hanging free.  Very limited help though because if it does work anyway it says nothing because the card may only activate if it senses activity or it may only activate if plugging it in at both ends crates a short.  I don’t know enough about how ethernet cards detect things.  If it failed with an unpowered cable though it would mean the ethernet on the mobo is in play somehow.  If I knew more about the peculiarities of ethernet I might be able to tell you more.  I think I knew this once but have forgotten it.  Part of my brain wants to say if you put a connector on the other end of the cable even if it’s just an extension adaptor it might work. Maybe into an unplugged router or something.  I don’t trust the fuzzy side of my brain though. It gets things wrong a lot.

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

Ooh another thing came into my head: just reflash the bios.  Might cause entirely different problems though.

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Bombastinator said:

Ooh another thing came into my head: just reflash the bios.  Might cause entirely different problems though.

You think it’ll be easier to deal with different problems than this?? Sounds like good idea tbh ?

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Whiro said:

You think it’ll be easier to deal with different problems than this?? Sounds like good idea tbh ?

*cues up “the charge of the light brigade” as background music*

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

  • 3 weeks later...

It seems to work now guys, thanks for helping! it took a few reboots and now it doesnt do it anymore

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×