WATCHDOG VIOLATIONS ERRORS+

[ClippTube]

Hello I keep getting watchdog violation errors and when I turn the pc on it goes into an "Automatic Repair" loop. I have had some RAM related errors but cannot remember its name. I have tried restarting and "continue to windows 10" and it just puts me into the loop. I have tried exiting through BIOS and still puts me in a loop. I try to reset my pc and it says "there was a problem" In the past I have reset this computer over 5 times, and only have chrome installed. Is this a hardware issue?

[Skiiwee29]

Have you reset your BIOS? Power down the system, shut off your power supply, pull the battery from your motherboard for 30 seconds and press and hold your power button for 5 seconds to drain your caps and then put your battery back in and boot up. 

[Jurrunio]

or maybe the drive's failing? Could also be the OS corrupted itself somehow. Even a loose SATA connector can do that, really hard to pin point the problem unless you can try install another OS onto another drive and see if it still fails to work normally

[ClippTube]

Have reset my bios, but still remains in the loop 

[ClippTube]

^{PC also freezes randomly - dont know if that helps}

[ClippTube]

Have found out that it was a corrupted disk drive