Jump to content

I need help making a NAS

Josh Eubanks
 Share
Posted

I am wanting to create a NAS. My internet speed currently is 1GB/s.

I have been looking at this partlist: Click Here. It has a good looking case but I want the case that Linus uses in his server rack. Its the case that is rack-able and has a see through top. Any suggestions would be helpful, as I have no clue what I am doing

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
9 minutes ago, RelativeMono said:

WD 12TB My Cloud EX2 ?

Synology 4 bay NAS ?

 

But have you heard of FREENAS???? :P  

in all honestly the Synology Nas is actually not too bad. 

14 minutes ago, Josh Eubanks said:

I am wanting to create a NAS. My internet speed currently is 1GB/s.

I have been looking at this partlist: Click Here. It has a good looking case but I want the case that Linus uses in his server rack. Its the case that is rack-able and has a see through top. Any suggestions would be helpful, as I have no clue what I am doing

What are you looking to run on your nas? Just plex for your home? NextCloud? this will tell me what hardware you should run in it. 

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
16 minutes ago, BrinkGG said:

But have you heard of FREENAS???? :P  

in all honestly the Synology Nas is actually not too bad. 

What are you looking to run on your nas? Just plex for your home? NextCloud? this will tell me what hardware you should run in it. 

shh op is asleep

If I had one wish, I would ask for a big enough ass for the whole world to kiss

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, RelativeMono said:

shh op is asleep

sorry I'll whisper

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Servers, NAS, and Home Lab

×