Jump to content

Hello all! ~ so I have an Asus Rock B150M - A D3 mini atax motherboard - and I have a bunch of 5v 3pin RGB fans that are connected just fine ~ now I bought a deepcool gammax L240 v2 and it came with 2 RGB fans and the cooler system itself are RGB but they are 4pin 12v now as far as I can tell my motherboard does not have a 12v R G B connector.. I also bought a RGB converter from deepcool that is a 5v to 12v transfer hub that dose not help with my situation as it was recommended from deepcool support staff - so how do I connect these 12v 4 pin fans to the rest of my system? Any help would be appreciated thanks! 

 

 

Also side side note that I do have the fans connected and working it’s just the RGB on them and the cooler itself that I can’t get connected. 

Link to comment
https://linustechtips.com/topic/1102000-rgb-help/
Share on other sites

Link to post
Share on other sites

10 minutes ago, LostToTime64 said:

Do they make 12V to 5v transfer boxes? Or something like that?

They must for sure,

Yous said 

12 minutes ago, LostToTime64 said:

o I have an Asus Rock B150M - A D3 mini atax motherboard - and I have a bunch of 5v 3pin RGB fans that are connected just fine

Where to? why not connect there again?

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
https://linustechtips.com/topic/1102000-rgb-help/#findComment-12871568
Share on other sites

Link to post
Share on other sites

the 3 pin fans are all connected together and came hooked up with my computer case to a splitter and then are plugged into a normal 4 pin header on the motherboard - all the 3 pin fans are hooked up no problem and same with the 4 pin fans are also connected together and hooked up to the second 4 pin header on my motherboard the only problem is I can’t get the 4 pin RGB to work as it’s a 12v RGB plug that my motherboard doesn’t seem to have so I’m just not sure how to get them to run 

 

 

the 3 pin RGBs are hooked up to a little chip board on the side of the computer case and only require power 

Link to comment
https://linustechtips.com/topic/1102000-rgb-help/#findComment-12871925
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×