Jump to content

Hi all,

 

I'm looking to see if I can get some help and a clear answer,

I recently bought a Ryzen 2700x and I am using a RTX2070 Zotac blower model GPU, when I boot there doesnt seem to be a display, so i swapped the RTX for my old GTX 760 and it booted perfectly display works.

 

I'm just wondering if anyone else has this problem keep in mind my RTX works perfectly fine and has a display with my Ryzen 3 3200g but why not with the 2700x? so I know that both the CPU and GPU work but not together? HELP!!!!

 

Sorry if doesnt make sense

Link to comment
https://linustechtips.com/topic/1095317-help-please/
Share on other sites

Link to post
Share on other sites

Are you able to put both graphics card in at the same time and see what happens?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explainedgroup reg is bad

Link to comment
https://linustechtips.com/topic/1095317-help-please/#findComment-12818028
Share on other sites

Link to post
Share on other sites

It's a simple thing: But it could be possible that it does in fact work, and the cables just weren't connected properly or the card wasn't seated correctly when you tested the 2070 with 2700x. Then when you tested with the other GPU, you did correctly connect it up. 

Link to comment
https://linustechtips.com/topic/1095317-help-please/#findComment-12818029
Share on other sites

Link to post
Share on other sites

4 minutes ago, vK 3 1 RON said:

It's a simple thing: But it could be possible that it does in fact work, and the cables just weren't connected properly or the card wasn't seated correctly when you tested the 2070 with 2700x. Then when you tested with the other GPU, you did correctly connect it up. 

all been tested could it be that it has to be a display port for it to work? instead of hdmi

Link to comment
https://linustechtips.com/topic/1095317-help-please/#findComment-12818039
Share on other sites

Link to post
Share on other sites

Have you tried swapping out with a new display cable?

Spoiler

My Rig  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

CPU: AMD Ryzen 5600 GPU:  ARock B580 Challenger 12GB PSU: Novatech Powerstation V2 550w Semi Modular 

Mobo: Asus ROG Strix B450-F Gaming RAM: Adata XPG 16GB 3000mhz Storage: Sandisk Ultra 120GB SSD + 1 WD 1TB Blue + NVME 1TB Kingston

Case: Corsair Carbide Spec 05   Cooling:  AMD Raith Spectre RGB  Monitor:  Dell 27 Gaming Monitor G2722HS

Keyboard: Logitech G810 Orion SPECTRUM  Mouse: Logitech G502 Proteus SPECTRUM

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

Link to comment
https://linustechtips.com/topic/1095317-help-please/#findComment-12818056
Share on other sites

Link to post
Share on other sites

3 minutes ago, NateWick said:

Could it be its not compatable with that card?

Definitely not the case.

 

Just to check, what power supply are you using?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explainedgroup reg is bad

Link to comment
https://linustechtips.com/topic/1095317-help-please/#findComment-12818058
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×