Jump to content

Hey guys. I just recently installed afterburner to control my 2080 TI fan curve. I noticed that my memory clock boost to 7000 while in game. Is that a normal speed?

 

Also I noticed that sometimes my gpu boost and memory clocks will randomly spike for a second then go back down to normal while browsing the web. Is this a bug in software?

Link to comment
https://linustechtips.com/topic/1088359-2080-ti-memory-clock/
Share on other sites

Link to post
Share on other sites

4 minutes ago, Olivia Moore said:

Hey guys. I just recently installed afterburner to control my 2080 TI fan curve. I noticed that my memory clock boost to 7000 while in game. Is that a normal speed?

The short answer is yes.

 

The long answer is, it's complicated. I believe MSI Afterburner is making assumptions about memory speed, because the effective memory speed is 14,000 MHz. But it's "DDR" memory so supposedly it's really operating at 7,000 MHz (there's two transfers per clock transition). However I'm also getting reports (like from GPU-z) that the actual operating speed of the memory is 1,750 MHz.

 

4 minutes ago, Olivia Moore said:

Also I noticed that sometimes my gpu boost and memory clocks will randomly spike for a second then go back down to normal while browsing the web. Is this a bug in software?

No. Your web browser likely has hardware acceleration enabled. So if there's something that's a bit more intensive to process, like a video, the video card's speed will ramp up from idle clocks until said thing is either done or goes off screen.

Link to comment
https://linustechtips.com/topic/1088359-2080-ti-memory-clock/#findComment-12763222
Share on other sites

Link to post
Share on other sites

4 minutes ago, Mira Yurizaki said:

The short answer is yes.

 

The long answer is, it's complicated. I believe MSI Afterburner is making assumptions about memory speed, because the effective memory speed is 14,000 MHz. But it's "DDR" memory so supposedly it's really operating at 7,000 MHz (there's two transfers per clock transition). However I'm also getting reports (like from GPU-z) that the actual operating speed of the memory is 1,750 MHz.

 

No. Your web browser likely has hardware acceleration enabled. So if there's something that's a bit more intensive to process, like a video, the video card's speed will ramp up from idle clocks until said thing is either done or goes off screen.

So is their anything I should be worried about on either of these two points?

Link to comment
https://linustechtips.com/topic/1088359-2080-ti-memory-clock/#findComment-12763230
Share on other sites

Link to post
Share on other sites

Just now, Olivia Moore said:

So is their anything I should be worried about on either of these two points?

On the games spectrum, if you're playing a relatively intensive game and things don't ramp up, that's a bad sign.

 

On the light tasks spectrum, if the clock speed doesn't ramp back down to idle and you're certain the thing that could be using it is not there, that might be a problem. Though Task Manager will say which apps are using the GPU.

Link to comment
https://linustechtips.com/topic/1088359-2080-ti-memory-clock/#findComment-12763243
Share on other sites

Link to post
Share on other sites

13 minutes ago, Mira Yurizaki said:

On the games spectrum, if you're playing a relatively intensive game and things don't ramp up, that's a bad sign.

 

On the light tasks spectrum, if the clock speed doesn't ramp back down to idle and you're certain the thing that could be using it is not there, that might be a problem. Though Task Manager will say which apps are using the GPU.

The clock speeds only ramp up for about a second then immediately go back to normal. Mostly when I open a program or a web browser

Link to comment
https://linustechtips.com/topic/1088359-2080-ti-memory-clock/#findComment-12763298
Share on other sites

Link to post
Share on other sites

4 minutes ago, Olivia Moore said:

The clock speeds only ramp up for about a second then immediately go back to normal. Mostly when I open a program or a web browser

After reading your post I started Firefox and it shot the memory clock to 7200mhz from 450 on my 2080 ti. So I think it is normal.

RIG#1 CPU: AMD, R 7 5800x3D| Motherboard: X570 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX500 2.5" 2TB | Monitor: ASUS ROG Swift PG42UQ

 

RIG#2 CPU: Intel i9 11900k | Motherboard: Z590 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3600 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1300 G+ | Case: Lian Li O11 Dynamic EVO | Cooler: Noctua NH-D15 | SSD#1: SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX300 2.5" 1TB | Monitor: LG 55" 4k C1 OLED TV

 

RIG#3 CPU: Intel i9 10900kf | Motherboard: Z490 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 4000 | GPU: MSI Gaming X Trio 3090 | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Crucial P1 1TB | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

 

RIG#4 CPU: Intel i9 13900k | Motherboard: AORUS Z790 Master | RAM: Corsair Dominator RGB 32GB DDR5 6200 | GPU: Zotac Amp Extreme 4090  | PSU: EVGA 1000 G+ | Case: Streacom BC1.1S | Cooler: EK 360mm AIO | SSD: Corsair MP600 1TB  | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

Link to comment
https://linustechtips.com/topic/1088359-2080-ti-memory-clock/#findComment-12763322
Share on other sites

Link to post
Share on other sites

Just now, Olivia Moore said:

And did it go back to normal speed almost immediately?

Yes.

RIG#1 CPU: AMD, R 7 5800x3D| Motherboard: X570 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX500 2.5" 2TB | Monitor: ASUS ROG Swift PG42UQ

 

RIG#2 CPU: Intel i9 11900k | Motherboard: Z590 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3600 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1300 G+ | Case: Lian Li O11 Dynamic EVO | Cooler: Noctua NH-D15 | SSD#1: SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX300 2.5" 1TB | Monitor: LG 55" 4k C1 OLED TV

 

RIG#3 CPU: Intel i9 10900kf | Motherboard: Z490 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 4000 | GPU: MSI Gaming X Trio 3090 | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Crucial P1 1TB | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

 

RIG#4 CPU: Intel i9 13900k | Motherboard: AORUS Z790 Master | RAM: Corsair Dominator RGB 32GB DDR5 6200 | GPU: Zotac Amp Extreme 4090  | PSU: EVGA 1000 G+ | Case: Streacom BC1.1S | Cooler: EK 360mm AIO | SSD: Corsair MP600 1TB  | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

Link to comment
https://linustechtips.com/topic/1088359-2080-ti-memory-clock/#findComment-12763344
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×