PC Boot Loop Help!

[SageKingTyler]

i was watching youtube yesterday and then my pc froze so i waited but nothing happened so i held the power switch to shut it off then when i tried to turn it back on it turns on and off then immediately on and off again continuously i have tried unplugging everything and turning it on no change oh and one time while it was tuning on and off it stayed on and got stuck on the msi logo so i turned it off and turned it back on again and it hasn't got to that again screen again 

PC Stats: 

Motherboard:msi b250m bazooka 

hdd:1tb 

it came with 8gb RAM 3200 but i put another 2x4 gb so 16 in total (this was months ago i added it )

CPU: intel i5-7400

Gpu: msi rx 580 

also it windows 10 idk if that helps 

 

ok new update i took out 2 RAM sticks and now it turns on but nothing goes on my monitors and my keyboard/mouse dont light up either

ALSO i just noticed this now there is 2 white leds lighting up on the side of motherboard they like go up and down 

 

NEW Update the 2 lights are the EZ Debug lights for RAM And CPU 

Edited May 22, 2019 by SageKingTyler

[Radium_Angel]

4 minutes ago, SageKingTyler said:

helps 

Reset CMOS, and what age/quality is your power supply?

[41keems]

Also check if every cable, your RAM and graphics card are fully secure. I have had that issue with my rig, I have had a loose SATA, RAM, and graphics card before

[SageKingTyler]

12 minutes ago, Radium_Angel said:

Reset CMOS, and what age/quality is your power supply?

how and what happens if i reset cmos and the whole pc was bought on amazon but maade by cyberpower pc it was $720 the whole thing was cheaper then the gpu at the time beacus of mining but i belive psu was thermaltake or something something 

[SageKingTyler]

4 minutes ago, 41keems said:

Also check if every cable, your RAM and graphics card are fully secure. I have had that issue with my rig, I have had a loose SATA, RAM, and graphics card before

i did that 

[41keems]

1 minute ago, SageKingTyler said:

i did that 

I'm guessing that it can't even get into BIOS? Most likely a hardware issue. I would start by testing individual components if possible. Such as different power supply and RAM to start off with. When you start a computer it does a small check to make sure that everything connected is working, if something isn't working/responding they do what yours is doing.

[SageKingTyler]

2 minutes ago, 41keems said:

I'm guessing that it can't even get into BIOS? Most likely a hardware issue. I would start by testing individual components if possible. Such as different power supply and RAM to start off with. When you start a computer it does a small check to make sure that everything connected is working, if something isn't working/responding they do what yours is doing.

but why would it just randomly start doing this

[41keems]

3 minutes ago, SageKingTyler said:

but why would it just randomly start doing this

Hard to say man. Sometimes things just fail or come loose. Most likely it's nothing you've done. Also any way you can connect your hard drive to another machine to make sure it working?

[SageKingTyler]

14 minutes ago, 41keems said:

Hard to say man. Sometimes things just fail or come loose. Most likely it's nothing you've done. Also any way you can connect your hard drive to another machine to make sure it working?

noot really we have a family pc but i dont relly want ti mess with it 

[Radium_Angel]

2 hours ago, SageKingTyler said:

how and what happens if i reset cmos

If the CMOS is corrupt (a possibility) then resetting it will set the BIOS settings back to default (time, date, boot options, etc) but your hard drive and all contents will be fine.

If you don't feel comfortable doing this, take it to a computer shop and have it done.

[SageKingTyler]

2 minutes ago, Radium_Angel said:

If the CMOS is corrupt (a possibility) then resetting it will set the BIOS settings back to default (time, date, boot options, etc) but your hard drive and all contents will be fine.

If you don't feel comfortable doing this, take it to a computer shop and have it done.

but why would it corrupt out of no where 

[SageKingTyler]

3 hours ago, SageKingTyler said:

i was watching youtube yesterday and then my pc froze so i waited but nothing happened so i held the power switch to shut it off then when i tried to turn it back on it turns on and off then immediately on and off again continuously i have tried unplugging everything and turning it on no change oh and one time while it was tuning on and off it stayed on and got stuck on the msi logo so i turned it off and turned it back on again and it hasn't got to that again screen again 

PC Stats: 

Motherboard:msi b250m bazooka 

hdd:1tb 

it came with 8gb RAM 3200 but i put another 2x4 gb so 16 in total (this was months ago i added it )

CPU: intel i5-7400

Gpu: msi rx 580 

also it windows 10 idk if that helps 

ok new update i took out 2 RAM sticks and now it turns on but nothing goes on my monitors and my keyboard/mouse dont light up either 

[Radium_Angel]

10 hours ago, SageKingTyler said:

but why would it corrupt out of no where 

If computers were reliable, this forum wouldn't exist.

We start with basic troubleshooting steps, and that includes resetting things back to default.

9 hours ago, SageKingTyler said:

ok new update i took out 2 RAM sticks and now it turns on but nothing goes on my monitors and my keyboard/mouse dont light up either 

Are you using the dedicated GFX card or the one built-in to your CPU?

[SageKingTyler]

6 hours ago, Radium_Angel said:

If computers were reliable, this forum wouldn't exist.

We start with basic troubleshooting steps, and that includes resetting things back to default.

Are you using the dedicated GFX card or the one built-in to your CPU?

rx 580

[Radium_Angel]

58 minutes ago, SageKingTyler said:

rx 580

Try using the built-in one, assuming the mobo has video out capabilities.

Remove RX 580 first

[SageKingTyler]

39 minutes ago, Radium_Angel said:

Try using the built-in one, assuming the mobo has video out capabilities.

Remove RX 580 first

well i looked at the 2 blinking lights and they re the EZ debug lights and the ram and cpu ones are blinking but why would there be  problem with both out of nowhere 

[Radium_Angel]

3 minutes ago, SageKingTyler said:

both out of nowhere 

Very hard to say...