Jump to content

Rgb fan with static pressure

dubdub

So,  I'm looking for replacement fans for 1 of my old builds. I currently have 6 aero cool fans (black & white) and 1 is dying (coil wine & vibrating).

I'm debating going with rgb fans with higher amounts of static pressure.

 

The 1s I'm currently looking are -->

1: Thermaltake riing trios

2: Corsair LL 120s 

3: Ek- Vardar rgb 120's 

 

The reason I was thinking Thermaltake first was both sides are rgb lit , corsair is not. Corsair does have better static pressure,but this is kinda minuscule imo. The benefits of ek Vardar rgb is they sync with any lighting system u have, but I'm not sure if they have any gains quietness(db) wise or h20 static pressure. I'm basically looking for a all around decent rgb fan with good static pressure and low (db). Range of rpms would be a bonus as well. I have looked at noctuas, silent wing's, corsair sp(seem to loud), corsair mil 120s.

 

I have custom water loop in need of some change. Would like some help because they are quite expensive. Any other options are welcome and I would consider non rgb if swayed enough. If anyone knows of some new one's coming out please let me know,  I would hold off if they look tempting. I will hopefully be doing a new build soon so they will be swapped. 

Thanks,  can't wait for some suggestions!

 

 

20190423_155138.jpg

20190418_234430.jpg

20190418_234509.jpg

20190423_155124.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Does anyone have any suggestions? Would like to hear if anyone has experience with the fans listed or other alternatives you think I should look at.

Link to comment
Share on other sites

Link to post
Share on other sites

4 hours ago, dubdub said:

Does anyone have any suggestions? Would like to hear if anyone has experience with the fans listed or other alternatives you think I should look at.

I have corsair ll120's the white ones they are 2200rpm fans and they move air though my 360mm rad really well. They have an even higher static pressure than the black 1500rpm fans. They would look good in your build as well.

Internet Connection

My Rig: AMD Ryzen 9 3900X @ 4.3Ghz | Asus Prime X470-Pro | Corsair Vengeance RGB Pro 32 GB (4 x 8GB) DDR-4 3000Mhz OC'd @ 3400Mhz 16-20-20-38 |

EVGA RTX 2070 8GB XC Gaming OC @ 2145Mhz Boosted/ 1925Mhz Memory | WD SN750 500GB M.2 NVME | Gigabye 240GB SSD | 
XSPC EX 360mm | Corsair XC7 RGB CPU WB | EK-Vector RTX 2080 | Alphacool Eisbecher D5 150mm Plexi | XSPC Fittings | XSPC FLX Clear 7/16" ID, 5/8" OD |
Corsair LL120 x6 | Corsair RM750x White 2018 | Corsair Commander Pro | Corsair Obsidian 500D RGB SE | Corsair RGB LED Lighting PRO Expansion |
Corsair Strafe RGB MK.2 | Corsair Ironclaw RGB Wireless 18,000DPI | Acer 32" 4K 60Hz HDR600 Cert. ET322QK CBMIIPZX |

Passmark Score

3dmark Score

PC Parts Picker Link to Build

Network

Netgear LBR20 LTE Router | Verizon Unlimited Prepaid Hotspot Plan

HP 2530-48G-PoEP Switch

Rasberry Pi 4 Running Pihole

Linksys Velop 3 Mesh Wifi AP's

 

Link to comment
Share on other sites

Link to post
Share on other sites

On 4/25/2019 at 7:25 PM, ddennis002 said:

I have corsair ll120's the white ones they are 2200rpm fans and they move air though my 360mm rad really well. They have an even higher static pressure than the black 1500rpm fans. They would look good in your build as well.

I didn't know they had a white version. That might fit the scheme for sure. What are you fans running at & what's the temps like? I would perfer lower rpms with good temps.

Link to comment
Share on other sites

Link to post
Share on other sites

9 hours ago, dubdub said:

I didn't know they had a white version. That might fit the scheme for sure. What are you fans running at & what's the temps like? I would perfer lower rpms with good temps.

With the thicker radiator you have you would probably beable to run under 1500rpm. I run really aggressive fan curve just cause Im only running a 360mm x 25mm rad with 2700x and rtx 2070 both OC'd. So trying to get rid of as much heat as possible but I usually run them at about 1700rpm full load on the system. I get about 65c on the CPU and GPU under full load. I got plans to add a 240mm rad so I can run the fans a bit lower.

Internet Connection

My Rig: AMD Ryzen 9 3900X @ 4.3Ghz | Asus Prime X470-Pro | Corsair Vengeance RGB Pro 32 GB (4 x 8GB) DDR-4 3000Mhz OC'd @ 3400Mhz 16-20-20-38 |

EVGA RTX 2070 8GB XC Gaming OC @ 2145Mhz Boosted/ 1925Mhz Memory | WD SN750 500GB M.2 NVME | Gigabye 240GB SSD | 
XSPC EX 360mm | Corsair XC7 RGB CPU WB | EK-Vector RTX 2080 | Alphacool Eisbecher D5 150mm Plexi | XSPC Fittings | XSPC FLX Clear 7/16" ID, 5/8" OD |
Corsair LL120 x6 | Corsair RM750x White 2018 | Corsair Commander Pro | Corsair Obsidian 500D RGB SE | Corsair RGB LED Lighting PRO Expansion |
Corsair Strafe RGB MK.2 | Corsair Ironclaw RGB Wireless 18,000DPI | Acer 32" 4K 60Hz HDR600 Cert. ET322QK CBMIIPZX |

Passmark Score

3dmark Score

PC Parts Picker Link to Build

Network

Netgear LBR20 LTE Router | Verizon Unlimited Prepaid Hotspot Plan

HP 2530-48G-PoEP Switch

Rasberry Pi 4 Running Pihole

Linksys Velop 3 Mesh Wifi AP's

 

Link to comment
Share on other sites

Link to post
Share on other sites

What is your pump running at? Yes, the lower the better. Don't mind the fans kicking in at higher rpm while gaming. Also do you have a decent Oc? 

Link to comment
Share on other sites

Link to post
Share on other sites

8 hours ago, Bearmann said:

Or you could add some Phanteks HALO's to any fan.

Yes, I have looked at this, but I need new fans regardless. I guess I could look at silent wing's or noctua and add the halos. Really torn lol

Link to comment
Share on other sites

Link to post
Share on other sites

14 minutes ago, dubdub said:

What is your pump running at? Yes, the lower the better. Don't mind the fans kicking in at higher rpm while gaming. Also do you have a decent Oc? 

I have a D5 varo pump set at 3 out of 5, any higher than 3 there is no difference in temps for my current setup.

 

I have my 2700x running at 4.2 all cores, and the rtx 2070 I have a 165Mhz core OC and 900Mhz memory OC.

 

Like I said before i got plans to add another 240mm rad, but also to add a full monoblock covering CPU and VRM's. So far I been pretty happy with the performance of these fans.

Internet Connection

My Rig: AMD Ryzen 9 3900X @ 4.3Ghz | Asus Prime X470-Pro | Corsair Vengeance RGB Pro 32 GB (4 x 8GB) DDR-4 3000Mhz OC'd @ 3400Mhz 16-20-20-38 |

EVGA RTX 2070 8GB XC Gaming OC @ 2145Mhz Boosted/ 1925Mhz Memory | WD SN750 500GB M.2 NVME | Gigabye 240GB SSD | 
XSPC EX 360mm | Corsair XC7 RGB CPU WB | EK-Vector RTX 2080 | Alphacool Eisbecher D5 150mm Plexi | XSPC Fittings | XSPC FLX Clear 7/16" ID, 5/8" OD |
Corsair LL120 x6 | Corsair RM750x White 2018 | Corsair Commander Pro | Corsair Obsidian 500D RGB SE | Corsair RGB LED Lighting PRO Expansion |
Corsair Strafe RGB MK.2 | Corsair Ironclaw RGB Wireless 18,000DPI | Acer 32" 4K 60Hz HDR600 Cert. ET322QK CBMIIPZX |

Passmark Score

3dmark Score

PC Parts Picker Link to Build

Network

Netgear LBR20 LTE Router | Verizon Unlimited Prepaid Hotspot Plan

HP 2530-48G-PoEP Switch

Rasberry Pi 4 Running Pihole

Linksys Velop 3 Mesh Wifi AP's

 

Link to comment
Share on other sites

Link to post
Share on other sites

On 4/23/2019 at 7:58 PM, dubdub said:

So,  I'm looking for replacement fans for 1 of my old builds. I currently have 6 aero cool fans (black & white) and 1 is dying (coil wine & vibrating).

I'm debating going with rgb fans with higher amounts of static pressure.

 

The 1s I'm currently looking are -->

1: Thermaltake riing trios

2: Corsair LL 120s 

3: Ek- Vardar rgb 120's 

 

The reason I was thinking Thermaltake first was both sides are rgb lit , corsair is not. Corsair does have better static pressure,but this is kinda minuscule imo. The benefits of ek Vardar rgb is they sync with any lighting system u have, but I'm not sure if they have any gains quietness(db) wise or h20 static pressure. I'm basically looking for a all around decent rgb fan with good static pressure and low (db). Range of rpms would be a bonus as well. I have looked at noctuas, silent wing's, corsair sp(seem to loud), corsair mil 120s.

 

I have custom water loop in need of some change. Would like some help because they are quite expensive. Any other options are welcome and I would consider non rgb if swayed enough. If anyone knows of some new one's coming out please let me know,  I would hold off if they look tempting. I will hopefully be doing a new build soon so they will be swapped. 

Thanks,  can't wait for some suggestions!

 

 

20190423_155138.jpg

20190418_234430.jpg

20190418_234509.jpg

20190423_155124.jpg

Corsair LL's aren't particularly good by the way. They look nice, but are quite loud and quite poor quality generally. The Corsair ML fans on the other hand are excellent. They don't look quite as good as the LL series (less LEDs), but they have a much nicer noise profile, and have good static pressure too.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×