Jump to content

Low profile cooler for rvz03 build.

SGTechGamer

I'm picking out parts for my rvz03 itx build with a ryzen r5 2600, I'm looking at 3 low profile coolers for the build.

Im ordering them by newegg international 

Cryorig C1 sgd$69.90 (140mm slim fan) 

BeQuiet shadow rock lp sgd$49.90 (120mm fan) 

Noctua nh-L9a (sgd$79.90) (90mm fan) 

I know the noctua is the quietest among all the three but wilp the C1 or the shadow rock do a worse job cooling the cpu they have bigger fans and is cheaper. 

My Main System :  https://pcpartpicker.com/list/Hk4pcY (Silverstone Sugo SG13W) 

My Home Gaming Pc : https://pcpartpicker.com/list/Hk4pcY (Silverstone RVZ03) 

O

 

Link to comment
Share on other sites

Link to post
Share on other sites

the C1 i know will be cooler, even the C7 is. My C7 is also really quiet, cant speak for the C1 but it should be nice too

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

C1's the best, but can't the case hold bigger stuff like the L12S?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

12 minutes ago, SGTechGamer said:

I don't think the rvz03 can 78cm

RVZ03 is 83mm cooler + fan on the side panel, so indeed if you want the side intake fan you can't use anything more than 68mm (120mm slim fans are 15mm thick). However the C1 is 74mm tall, 4mm more than the L12S so I'm not understanding this difference in standards...

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×