New Build - BSOD

[CidCarrera]

Hi everyone! I recently built PC and I am running into a problem.

CPU - i5-8600k,
GPU - MSI GTX 1070Ti
MOBO - MSI MPG Z390 AC
RAM -16GB of Patriot 3000MHz
PSU - EVGA 850 G2

My problem is when I boot up I will last a couple minutes without doing anything then once I run a program I get a BSOD with different error codes. So far the ones I have received are KERNEL_MODE_HEAP_CORRUPTION, KERNEL_SECURITY_CHECK_FAILURE, PFN_LIST_CORRUPT.

I have reinstalled windows and I still get these. I read that it could be my GPUs driver so I try installing the latest version but then I will get the BSOD. I have updated my BIOS to the latest one released. I have tried doing the chkdsk /r command in prompt but it gives me an error saying that my drives are the wrong format. I have tried the sfc /scannow and nothing changes. I ran memtest86 to see if it was the RAM and it found nothing. I'm completely lost. I ran Memtest on all 4 sticks of RAM both as one unit and each individually and no errors show up. I let it run for about 2 passes each.

Any help would be appreciated. Thanks!

[CidCarrera]

17 hours ago, CUDAcores89 said:

Have you actually tried using an entirely different graphics card?

 

At this point I would try swapping hardware. Pull out your graphics card and test with just the intel HD graphics installed. See if it still BSODs.

Hey so I tried that and I still got the BSOD.