Intel Microcode - System Bluescreen - Hypervisor - Event log

[JamesTheGreat]

My system just had a hard crash and blue screen with the follow as a cause in the even logs.

I'm wondering if anyone has seen this before..

 

From Event Viewer-

The hypervisor did not enable mitigations for CVE-2018-3646 for virtual machines because HyperThreading is enabled and the hypervisor core scheduler is not enabled. To enable mitigations for CVE-2018-3646 for virtual machines, enable the core scheduler by running "bcdedit /set hypervisorschedulertype core" from an elevated command prompt and reboot.

 

Intel Core i7-8086K

Ga-z370-ultra gaminig wifi

16gb Ballistix Sport DDR4

GTX 1070 Founders Edition

32gb Optane

500gb WD m.2 NVME SSD

4tb Spinning Storage

CPU - Water Cooled w/ Thermal Take D5 Pump/res combo & Aqua Computer H2O Block / 480mm 4Fan Rad... 

Video - Watercooled w/ Thermal Take D5 Pump/res combo, EKWB & Aqua Computer 380mm 3Fan Rad...

Thermal Take 800Watt Gold PSU.

[badreg]

If you're not on the latest BIOS, updating to the latest microcode seems like it should fix this.

 

Otherwise, you can just do what it suggests and enter this into a PowerShell:

 

bcdedit /set hypervisorschedulertype core

[JamesTheGreat]

8 hours ago, badreg said:

If you're not on the latest BIOS, updating to the latest microcode seems like it should fix this.

 

Otherwise, you can just do what it suggests and enter this into a PowerShell:

 

 

bcdedit /set hypervisorschedulertype core

 

I am running the latest bios, and I've already updated the CPU Microcode so IDK why this is happening at all...