Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Tristerin

Project: Dwight

Recommended Posts

Posted · Original PosterOP

Found the solution, the wiring harness has to have two of its wires swapped to work on my motherboard.

 

However Im seeing another snag.

 

@Mick Naughty and others - Ive let the loop run now for about 20 minutes.  I did 3 pre rinses on all parts.  I can already see junk gathering up on the CPU block that looks like refuse (not a lot but a few black specs in the fins) how can I flush this block, do I need to take it apart?  I plan on now flushing the system a few times to clear up the gunk which apparently didn't come out with my rinses (aliexpress for the win!)


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites
Posted · Original PosterOP

WEVE GOT POST!  SHES ALIVE  Pics to come soon


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites
Posted · Original PosterOP

Most of you said it would be dumb...lets find out.  Mix those metals, use antifreeze, and buy it all super cheap from Aliexpress.

 

Pump/rad - $23 shipped

CPU block - $12 shipped

GPU block/strap - $4 shipped

Hoses - $3 shipped

Radiators - $13 shipped

Fans - Newegg Arctic F8 (which are doing AMAZING for putting air through this) x 4 $16

Fluids - $2 if broken down to the $18 I spent and how many flushes I can now do or more

 

Now lets see how long it lasts, will report back when/if it fails.  Will report back if galvanic corrosion appears.  Right now need to figure out how to clean this debris out of the block since the rinse didn't get it all without full dismantle if possible lol (lack of time)

 

 

lastfinal.jpg

lastfinal1.jpg

lastfinal2.jpg

lastfinal3.jpg

lastfinal4.jpg


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites

You don't have to take it apart to clean but it helps. Reversing the flow could be enough. Go to a local auto part store and get a low pressure fuel filter. Should match your hose well. They will be plastic and see through. Perfect for filtering a loop. Gonna do it to mine as something keeps breaking down.


Main RIg Corsair Air 540, I7 8700k, ASUS ROG Strix Z370-H, G.Skill TridentZ 16GB, EVGA 1080 SC, EVGA 850 GQ, Acer KG251Q 1920x1080@240hz 

 

Spare RIg Corsair Air 540, I7 4770K, Asus Maximus VI Extreme, G.Skill Ares 32Gb, EVGA 1080 SC, Corsair CX850M, Acer xG270HU 2560x1440@144hz

 

 

Link to post
Share on other sites
Posted · Original PosterOP
54 minutes ago, Mick Naughty said:

You don't have to take it apart to clean but it helps. Reversing the flow could be enough. Go to a local auto part store and get a low pressure fuel filter. Should match your hose well. They will be plastic and see through. Perfect for filtering a loop. Gonna do it to mine as something keeps breaking down.

Thank you!!!


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites
5 minutes ago, Tristerin said:

Thank you!!!

But if the stuff it big enough to get caught in the micro fins or what ever the blocks have, reversing the flow or taking it apart is the only way to get stuff out.

 


Main RIg Corsair Air 540, I7 8700k, ASUS ROG Strix Z370-H, G.Skill TridentZ 16GB, EVGA 1080 SC, EVGA 850 GQ, Acer KG251Q 1920x1080@240hz 

 

Spare RIg Corsair Air 540, I7 4770K, Asus Maximus VI Extreme, G.Skill Ares 32Gb, EVGA 1080 SC, Corsair CX850M, Acer xG270HU 2560x1440@144hz

 

 

Link to post
Share on other sites
Posted · Original PosterOP
2 minutes ago, Mick Naughty said:

But if the stuff it big enough to get caught in the micro fins or what ever the blocks have, reversing the flow or taking it apart is the only way to get stuff out.

 

1 pc looks like its not moving, rest have either moved/passed back into a radiator - Ill give it a bit and then take it apart if I have to - thank you for the advice!


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites
Posted · Original PosterOP

Idle temps up to 40c

Prime95 30 minutes 59c

 

I have a mount issue.  Or a thermal paste issue.  For fun I used the grease that came with my Aliexpress block just to see, instead of committing straight to Grizzly.  Going to tighten it down a crank and see if that fixes temps, if not will take off block, clean it and re-mount with Kryonaut.

 

Unlikely this weekend but still need to get an acrylic panel, cut and mount for see through ugly goodness!


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites

Id pass on anything thermal Grizzly other then liquid metal. Mx4 and the higher end phobya stuff tend to be a better by. 

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, Mr. horse said:

Id pass on anything thermal Grizzly other then liquid metal. Mx4 and the higher end phobya stuff tend to be a better by. 

I have a tube already at the ready, plus its amazing imho - Kryonaut took my FX 8350 from 59c to 54c under max load FU stress tests...I swear by it now lol

 

No Mx4 on hand anyhow :(


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites

Its not bad stuff. But there is better compounds out there and far better buys out there too. But if you already have some go for it. 

Link to post
Share on other sites
Posted · Original PosterOP

Havent changed anything on CPU block yet - 1 hour into Prime95 and Heaven Extreme Preset and chill later: 

 

Not bad temps, Im blaming the high CPU (I think its high) temps on the chinesium TIM and likely bad mount.

 

Look at that little aluminum GPU block go lol:

 

 

Capture123 (1).PNG


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites

Love the post, @Tristerin. Very entertaining!

 

That thing was GROSS in the initial photos, between the dust and the cable management!

Good job getting it cleaned up!

Good job getting the loop working!

 

Quote

GPU block arrived today - cant beat this $5 aluminum setup coupled with Kryonaut lol.  Wonder how it will perform.

This cracked me up. When your tube of thermal paste is 3x the price of your block XD

Link to post
Share on other sites
Posted · Original PosterOP
37 minutes ago, trevb0t said:

Love the post, @Tristerin. Very entertaining!

 

That thing was GROSS in the initial photos, between the dust and the cable management!

Good job getting it cleaned up!

Good job getting the loop working!

 

This cracked me up. When your tube of thermal paste is 3x the price of your block XD

I had to finish this project or the wife would kill me, it was taking up space in our bedroom lol Im hoping to mess with the ram stuff next weekend as this thing is near completion


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites
4 minutes ago, Tristerin said:

I had to finish this project or the wife would kill me, it was taking up space in our bedroom lol Im hoping to mess with the ram stuff next weekend as this thing is near completion

I've taken the current RAM test results to mean it's at least a 10% upgrade in most cases. I've seen a few videos where it makes as much as a 30% difference. (In Shadow of the Tomb Raider no less.)

Link to post
Share on other sites
Posted · Original PosterOP

The beast isn't finished yet just shelved, you mentioned cable management and I thought...yup needs more.  Going to look for some braided SATA cables etc, need to affix a fan on the GPU to blow on the VRMs, some electrical tape on the ketchup and mustard cables then tucked and still need to do the acrylic side panel, updates to come!


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites
Posted · Original PosterOP

https://www.newegg.com/Product/Product.aspx?Item=9SIA1331705705&ignorebbr=1

 

Anyone one up these cables?  Price range is negotiable looking to get round wires is the only real pre-req for cable management.  For price, and....looks (they say "Dwight" to me) lol I don't think they can be beat


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites
Posted · Original PosterOP

Ugly cables arrived - however the website shows them as round wires, they are in fact flat like every other GD sata cable I have.  Well that was a waste of time and 6 bucks or whatever.  Either way Im using them so it matches but...I have like 100 sata cables...its just depressing to have more LOL.  They do not match the pictures AT ALL.  They are sleek very flat wires.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 2133mhz Patriot Viper, Corsair HX850 PSU, Stock cooler (bracket in the mail), 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case

Ryzen Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, 640gb WD Blue 7200 RPM Mech drive, Rosewill Nautilus 1.0 Case

Media Center:  See Project: Dwight in the builds section of the forum

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

 

A couple laptops and tablets around the house

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×