Search the Community

So guys im planning to do a full watercooled pc. So far these are the things i have decided Case Dark base 900 (Case received) Cpu Ryzen 1800x. (Waiting to receive my preorder unit) Fans Silent wings 3 120mm (Stock received) Okay i fcked up again. Since im so used to 120mm i literally taught the case support 480. I Even checked the website before for the radiator support and i dont understand how come i got confused with 420mm with 480mm. Im such an idiot. I asked my local shop to exchange 120mm with 140mm so problem solved. Rams Trident Z Rgb 4x8gb dual channel 3200mhz (Waiting stock getting it on march probably same time with ryzen) Ssd 2x 850 pro 512gb in hand and probably getting a 960 evo since supplier in my region still havent bring in stock for 960 pro Block Ekwb supremacy evo full nickel with am4 mount (For some reason ekwb say its free and add 0.01 for the additional mounts) (Ordered waiting shipment to arrive) Fittings Barrrow TYKN K-16 V1 Silver and Acrylic tubing (Ordered waiting shipment to arrive) Reservoir Singularity computers protium reservoir medium with D5 pump top and mod kit And i just realised i fck up when i checked my order and the ethereal dual reservoir mount wasn't listed in my order. First world problems people. (Need to reorder cause left out some parts) Ok reordered so problem solved Pump 2x Laing D5 (stock received) I still havent ordered my radiator because im not sure wt type radiator im going to use until i receive my case to take measurements. Roughly im planning a 480 at the top and front. Im borrowing some stuff from my friends like the heat gun, silicon insert, and bending kit. I have some experience with petg before but havent played with acrylic. So if my bends are bad pls advice me wts wrong. I still havent decided wt colour of loop should go into my build. I will update here after i receive my parts. I wished to get some tips and tricks how i see other build log u guys really take some great pictures. I have a sony rx 100 v but i dont know how to take great pictures with it. I have tried messing with the settings and manual mode but still doesnt turns out to be as good. Do u guys do some post processing on the pictures or u guys have some magic settings pls share with me since i would love to take some great shots too. Okay i have a question and this is important. If i run my pump configuration in series how do set it up. Is it as simple as 1st pump out to the 2nd pump inlet and 2nd pump out to the hardware and water flows back in to the 1st pump. Sorry if this question is silly i havent done pump configuration in series before just making sure.

Singularity Computers Core Mount comes in 2 pack (Available in variety different colours) Assembling is very straight forward. Removes the screw from the 4 handles. Allign them and just screw them together. Next screw the back bracket Now lets have a look at singularity computers reservoir and its accessories The reservoir box have measurements of the reservoir which is helpful in case u wan to refer to the dimensions Once open the box you are greeted with singularity computers stop fittings Reservoir is placed inside a protective plastic cover The beauty about this res after u dismantle the the black ring u can move the top facing any direction you want. Remove the top and there is a white o ring to go with the frosted top. Once u fix a position. U can just screw down the black ring to hold its position. Same goes to the bottom Now lets have a look at the D5 top (Frosted version) U will see the top is packaged in an anti static bag Come with a white oring and some screws that can be used to mount the top. (Bottom VIEW) Top VIew Can be used as a standalone unit or can be used as an upgrade kit with existing protium res to make it into a single unit. To use it with protium res just unscrew the top unit. There is an oring inside that u dont have to remove. Leave it as it is. To mount protium res to the d5 top. Remove the bottom unit and attached it with the top. Before that unscrew the flow channel tube and screw it to the d5 top Keeps the rest of these accessories save back into the box if u wanted to use it back in the future After combining the res and d5 top Next is the D5 cover. Is covered in the anti static bag once u opened the box Inside you have the D5 cover and bottom plate. The rubber which is provided is removed and placed on the plate which helps to cushion the d5. Once assembled with the res of the unit To use the reservoir core mount to mount the res to the radiator are as follows. FInd the small screws which can be find in the radiator box that you have bought. Use these screw and mount the core to the radiator. If u dont have these small screws. Just get them from ur local hardware shop. Next remove the 4 screws holding the core highlighted in yellow and place the res u prefer and screw it back. Fully assembled Last but not least for the protium d5 cover. Due to its modular design. If u have a manual pump and u want to change the speed. U can just remove the bottom cover without the need to bleed the entire loop and remove the cover. Thanks for having a look. A very modular design for this reservoir and the accessories. Enthusiast or even beginners will love this. Current offerings by ekwb, bitspower or alphacool have limitation and arent this flexible in design. Not to mention the quality is solid due to aluminium cnc parts. The frosted version looks incredible but they also offer other choice like polished aryclic and acetal.

Hi,I'm in desperate need for a watercooling community advice.Is one D5 EK pwm pump enough to run Monoblock ,GPU block and 3x Hardware Labs,SR2 420mm/60mm thick,SR2 360mm/60mm thick and GTS 360mm/30mm thick and aprox max 1m brass tubing 16mm OD.Will be using Singularity Computer D5 top and reservoir.Thanks in advance for your help.

I’ve never done a build log before. Usually I just build rigs and never show anyone, but when the case is $1400AUD shipped I guess I should epeen about it with someone.https://www.singularitycases.com/product/spectre/I have decided on a purple , white and black theme. The name of this build be called SUPERUNICUM, a world of Tanks reference (I’m a former pro WoT player)Parts List Purchased and waiting for case to arrive in approx 3-4 weeks.Main itemsSingularity Cases Spectre Black (proof https://imgur.com/a/YezjA )GTX 1080ti FE8700k (delidded with conductonaut) https://i.imgur.com/uQZM0rb.jpgMaximus Hero X https://i.imgur.com/Vqg3bBH.jpg?132GB Gskill DDR4 3000Mhz Trident Z RGB https://i.imgur.com/PAi1FFy.jpgSamsung 960 Pro 500Gb m.2 https://i.imgur.com/uspTmye.jpg?1Samsung 750Gb 840 Pro SSDCABLEMOD PRO Cable set WHITE https://i.imgur.com/qv0KWR4.jpgCorsair 1200AXi PSUWatercoolingBitspower fittings 16mm https://imgur.com/a/cm7SA (a lot)Bitspower MonoBlock ARMXH RGB-NickelBitspower Leviathan Xtreme 360 Radiator x 2Bitspower 16mm AcyrlicEK Waterblocks EK-FC Nvidia GTX FE RGB Nickel GPU WaterblockEK PLEXI FC TerminalPrimoChill VUE 2L Candy Purple (still undecided on using this after all horror stories)Noiseblocker NB-eLoop B12-P Bionic fan 120MM x 6SIngularity computers Protium Res 200mm with 2 x 4port cap endsThermaltake Temp Sensor https://i.imgur.com/GfQwiZo.jpgThermaltake Hard Tube bend kit https://i.imgur.com/rIRuZAF.jpg?1ThermalGrizzly conductanaut and Kryonaut https://i.imgur.com/RbdXSpk.jpgWIPBolagnaise

It all started with a spare parts and a great black friday deal. I wanted to get my brother a pc for chrismas. So i did, 1600x, 1060, not a bad pc. He was hooked and needed it to be watercooled . So i gathered up spare parts and ordered a rad and res. 1600x 8gb ram (ordering 16gb rgb set) titan x pascal Moonlightmods case 256gb ssd silverstone 850 all glass tubing (mayhems) here is were the build sits right now. 9ABBF7DB-1FF9-499C-8343-EF33860FA8E7.mov

Singularity computers is another youtuber, he specializes in custom watercooling loops, and does a great job of teaching how to watercool. Three days ago he released this video: If you're short on time and can't watch, here is the TL;DW: (too long; didnt watch) -Daniel started SingularityComputers workshop to make builds faster and get more video content (because he has 100k subs now) -had to train people who had no idea about PC, so he had little time to make videos, and still did almost all the work himself -his son got sick, and had to be brought to a hospital outside his area -Daniel flew to go see his son, leaving the workshop to run on its own -When he got back, stuff had fallen apart -He lost almost everything, drugs were involved, and some of the people who were working for him threatened his life (Daniel is in his 20s, the people working for him were much older) -he is now going back to independent work and video making, and closing the workshop -stuff he can't manufacture himself will be outsourced instead (like machining, anodizing, etc.) I thought people here should also know what happened, because he wants his subscribers to be informed about what's going on. I wish him luck and hopefully he can recover from this without problems.

Hi Guys! Thought I'd share my adventures at PAX Aus today This is from the main entrance hall. the entire thing filled but there was a continuous thick flow of people stumbling in after opening :P Got my Uber pro lanyard position thanks to Slick loop through your belt buckles, so you don't look like a nuff nuff with it around your neck all day Oh yes, there was beach balls! With profanities drawn on them! the best kind of beach balls! I got video of a competition every body got into, It was of like 10 beach balls in the crowd and it was to hid them over the Giant map in pic 1. Great success! Believe it or not, there was people sitting on every single bean bag within a couple hours! Free play PC area, they filled up every spot and the line went on for like 50 or so people. I played cs go for about an hour with my team mate before heading to the Steelseries booth Ah Ha! But before I tried out my luck at a 3 v 3 vs team immunity I went strait to the cooler master booth (which I forgot to take fricken pictures of), to see the amazing work Singularity computers had put into the cosmos 2 build he's been teasing on facebook ;) if you haven't heard of him already, I advise you to check him out! http://www.youtube.com/channel/UCqChlb8y4cQ0jAFaNFPQLqA Brilliant case modder, water cooler, and niche systems builder. Just some awesome tf2 cosplay I had to pic xD Apparently this game about tanks is pretty popular, not quite sure why :P LUUUUUUUUUUUUUUUUUUUUNNNNNNNNNNNNCH! BBQ pork buns, don't know why i'm excited, they were shit. The line to saints row 4.... screw it, not even allowed in anyway. Psst! Oculus rift! Not that great... could count each pixel individually. I hope there will be higher resolution revisions in the future :/ PS: not me in the pick, I'm waiting in line. Yeah, alienware was a thing... I think they may have even given me a hat at one point, then I must have burnt it. LoL... that's all I have to say :P Hazar! I found a pic of me at the steelseries booth! Tada! All my swag from the day! But wait! there's more! I won an Apex in the cs go comp against team immunity scoring the most frags on my team xD it's not out in Aus yet, so it's a little exclusive. Unfortunately I have to use for it so... http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=231019323265 My most memorable event by far is having a lovely conversation with a very beautiful and friendly cosplayer named Elizabeth, no it was actually her friend who dressed as Elizabeth, but she dressed as steampunk cat woman... 2 very cool fandoms that just so happens I'm now a fan of ;) I recommended her a great restaurant near where she was staying and then we parted ways, both disappearing like phantoms. I hope to see her cosplaying there next year That concludes the pictures and main things I saw and did at pax, feel free to tell me what you did at pax this weekend (if you were there). It would be great to get a discussion going!