MysteriousHaider

I started with removing the original coating with some sandpaper. Next step was gluing a piece of veneer on the front. In my case I used double sided tape. Next step is using some wood stain to colour the veneer, last step is coating the veneer with some clear lacquer.
 
Sorry for such a delayed answer. 

I have watched some of his videos too! Should you build a CNC one day I would recommend making a design that require as little machining as possible. Using a lot of extrusions is also recommended its a bit pricey, but easy to work with. The plan is to replace the current tower with extrusions and two aluminium plates, to lower the weight and increase its strength. When the project is done I will probably upload all the drawings available for a couple of bucks or for free (depends on how much work I spend on instructions and the end result).

No, but I will probably start construction this weekend. All the parts made out of MDF will be cut and glued together, will post some pictures as soon as possible.
 
Edit: Forgot to take any pictures

Welcome to my build, which I finished just a couple of hours ago. 
Watercooling components:
Rad: Alphacool NexXxos UT60 240mm
CPU-block: EK Supremacy Black + Nickel
Pump: Alphacool D5
Fittings: Blandning av EK PSC fittings 
Tubing: Masterkleer PVC Clear
Res: Alphacool Repack - Single Laing D5 
Rad fans: 2 stycken Corsair SP120 Quiet Edition
Fittings
1 x Bitspower Multi Transfer Adapter Black
2 x Bitspower Multi Link Silver Shiny
8 x EK PSC 45 Nickel
6 x EK PSC Compression Nickel
5 x EK PSC 90 Nickel
1 x EK 1,8mm spacer
Hardware:
CPU: i5 3570K
Mobo: MSI GD55 Z77A
PSU: Corsair AX750
GPU: Asus GTX 670 DCII
HDD: WD Caviar Black 1TB
SSD: Samsung 830 128GB
RAM: 16GB Corsair Vengeance LP 1600MHz
As you can see I've changed quite a lot in the case. Midplate, cover for the 5,25" bays, rad mount, PSU cover and SSD mount (the panel left of the rad).
 

 
Close up of the Midplate and HDD bays.
 

 
Exhaust fans. 
 

 
Pump + res.
 

 

 
The front.
 

 
Overview
 

 
Pump + res + fittings
 

 
a Scythe Kaze 3,5" mounted above res and pump.
 
 

 
Drainage tube.
 

 

 
Finshed! I know terrible pictures...
 


 
Drainage system finished

 
Thanks for checking out my build! Any questions? Please ask them below. 
 

It's a Define R3

Welcome to my build, which I finished just a couple of hours ago. 
Watercooling components:
Rad: Alphacool NexXxos UT60 240mm
CPU-block: EK Supremacy Black + Nickel
Pump: Alphacool D5
Fittings: Blandning av EK PSC fittings 
Tubing: Masterkleer PVC Clear
Res: Alphacool Repack - Single Laing D5 
Rad fans: 2 stycken Corsair SP120 Quiet Edition
Fittings
1 x Bitspower Multi Transfer Adapter Black
2 x Bitspower Multi Link Silver Shiny
8 x EK PSC 45 Nickel
6 x EK PSC Compression Nickel
5 x EK PSC 90 Nickel
1 x EK 1,8mm spacer
Hardware:
CPU: i5 3570K
Mobo: MSI GD55 Z77A
PSU: Corsair AX750
GPU: Asus GTX 670 DCII
HDD: WD Caviar Black 1TB
SSD: Samsung 830 128GB
RAM: 16GB Corsair Vengeance LP 1600MHz
As you can see I've changed quite a lot in the case. Midplate, cover for the 5,25" bays, rad mount, PSU cover and SSD mount (the panel left of the rad).
 

 
Close up of the Midplate and HDD bays.
 

 
Exhaust fans. 
 

 
Pump + res.
 

 

 
The front.
 

 
Overview
 

 
Pump + res + fittings
 

 
a Scythe Kaze 3,5" mounted above res and pump.
 
 

 
Drainage tube.
 

 

 
Finshed! I know terrible pictures...
 


 
Drainage system finished

 
Thanks for checking out my build! Any questions? Please ask them below. 
 

Raidmax Titan 901 

I might order some to support the GPU. Thanks for the idea!

They're really quiet (rated at 18db) and when running them at 5V they're almost completely quiet. The quality is okay and moves an acceptable amount of air. Would I recommend them? Yes, at the low price of 10€ they are great. 

Welcome to my build, which I finished just a couple of hours ago. 
Watercooling components:
Rad: Alphacool NexXxos UT60 240mm
CPU-block: EK Supremacy Black + Nickel
Pump: Alphacool D5
Fittings: Blandning av EK PSC fittings 
Tubing: Masterkleer PVC Clear
Res: Alphacool Repack - Single Laing D5 
Rad fans: 2 stycken Corsair SP120 Quiet Edition
Fittings
1 x Bitspower Multi Transfer Adapter Black
2 x Bitspower Multi Link Silver Shiny
8 x EK PSC 45 Nickel
6 x EK PSC Compression Nickel
5 x EK PSC 90 Nickel
1 x EK 1,8mm spacer
Hardware:
CPU: i5 3570K
Mobo: MSI GD55 Z77A
PSU: Corsair AX750
GPU: Asus GTX 670 DCII
HDD: WD Caviar Black 1TB
SSD: Samsung 830 128GB
RAM: 16GB Corsair Vengeance LP 1600MHz
As you can see I've changed quite a lot in the case. Midplate, cover for the 5,25" bays, rad mount, PSU cover and SSD mount (the panel left of the rad).
 

 
Close up of the Midplate and HDD bays.
 

 
Exhaust fans. 
 

 
Pump + res.
 

 

 
The front.
 

 
Overview
 

 
Pump + res + fittings
 

 
a Scythe Kaze 3,5" mounted above res and pump.
 
 

 
Drainage tube.
 

 

 
Finshed! I know terrible pictures...
 


 
Drainage system finished

 
Thanks for checking out my build! Any questions? Please ask them below. 
 

Welcome to my build, which I finished just a couple of hours ago. 
Watercooling components:
Rad: Alphacool NexXxos UT60 240mm
CPU-block: EK Supremacy Black + Nickel
Pump: Alphacool D5
Fittings: Blandning av EK PSC fittings 
Tubing: Masterkleer PVC Clear
Res: Alphacool Repack - Single Laing D5 
Rad fans: 2 stycken Corsair SP120 Quiet Edition
Fittings
1 x Bitspower Multi Transfer Adapter Black
2 x Bitspower Multi Link Silver Shiny
8 x EK PSC 45 Nickel
6 x EK PSC Compression Nickel
5 x EK PSC 90 Nickel
1 x EK 1,8mm spacer
Hardware:
CPU: i5 3570K
Mobo: MSI GD55 Z77A
PSU: Corsair AX750
GPU: Asus GTX 670 DCII
HDD: WD Caviar Black 1TB
SSD: Samsung 830 128GB
RAM: 16GB Corsair Vengeance LP 1600MHz
As you can see I've changed quite a lot in the case. Midplate, cover for the 5,25" bays, rad mount, PSU cover and SSD mount (the panel left of the rad).
 

 
Close up of the Midplate and HDD bays.
 

 
Exhaust fans. 
 

 
Pump + res.
 

 

 
The front.
 

 
Overview
 

 
Pump + res + fittings
 

 
a Scythe Kaze 3,5" mounted above res and pump.
 
 

 
Drainage tube.
 

 

 
Finshed! I know terrible pictures...
 


 
Drainage system finished

 
Thanks for checking out my build! Any questions? Please ask them below. 
 

Welcome to my build, which I finished just a couple of hours ago. 
Watercooling components:
Rad: Alphacool NexXxos UT60 240mm
CPU-block: EK Supremacy Black + Nickel
Pump: Alphacool D5
Fittings: Blandning av EK PSC fittings 
Tubing: Masterkleer PVC Clear
Res: Alphacool Repack - Single Laing D5 
Rad fans: 2 stycken Corsair SP120 Quiet Edition
Fittings
1 x Bitspower Multi Transfer Adapter Black
2 x Bitspower Multi Link Silver Shiny
8 x EK PSC 45 Nickel
6 x EK PSC Compression Nickel
5 x EK PSC 90 Nickel
1 x EK 1,8mm spacer
Hardware:
CPU: i5 3570K
Mobo: MSI GD55 Z77A
PSU: Corsair AX750
GPU: Asus GTX 670 DCII
HDD: WD Caviar Black 1TB
SSD: Samsung 830 128GB
RAM: 16GB Corsair Vengeance LP 1600MHz
As you can see I've changed quite a lot in the case. Midplate, cover for the 5,25" bays, rad mount, PSU cover and SSD mount (the panel left of the rad).
 

 
Close up of the Midplate and HDD bays.
 

 
Exhaust fans. 
 

 
Pump + res.
 

 

 
The front.
 

 
Overview
 

 
Pump + res + fittings
 

 
a Scythe Kaze 3,5" mounted above res and pump.
 
 

 
Drainage tube.
 

 

 
Finshed! I know terrible pictures...
 


 
Drainage system finished

 
Thanks for checking out my build! Any questions? Please ask them below. 
 

Picture of the front:
. 
 
Check page 2!!!

Picture of the front:
. 
 
Check page 2!!!