Nobody was nice enough to provide dimensions so I measured it myself. Here's the thread if anybody is interested:
https://www.reddit.com/r/pcmods/comments/co5zhc/i_have_to_get_rid_of_asrock_taichi_x570_chipset/ewsnfn0/
fan diameter ~35mm heatsink dimensions ~57mm x 70mm x 6mm heatsink standoffs ~6mm distance between heatsink mounting bolts ~53mm chipset dimensions ~25mm x 25mm
Nobody was nice enough to provide dimensions so I measured it myself. Here's the thread if anybody is interested:
https://www.reddit.com/r/pcmods/comments/co5zhc/i_have_to_get_rid_of_asrock_taichi_x570_chipset/ewsnfn0/
fan diameter ~35mm heatsink dimensions ~57mm x 70mm x 6mm heatsink standoffs ~6mm distance between heatsink mounting bolts ~53mm chipset dimensions ~25mm x 25mm
So , I have now got my board x570 taichi and one of the above coolers and there are two main problems
I've fit the cooler , it fits on the chipset just fine . However it then means that the 1st and second pcie slots are unusable with a long gpu (gtx1080ti with water lock) . The bottom slot is available , and may then be a option for some people . I however trying doing this in a inwin 303 and the bottom slot in that case is unavailable for any card as it's so close to the floor . I have ordered a bracket to turn the card vertical. This should allow for me to fit my card and cool both .
The second problem is the metal cover that also acts as a nvme cooler . This obviously does not fit any longer . There seams to be two options here . Either cut a section out of the metal cover which would work but destroy any resale value , so I will leave it off and use a aftermarket nvme passive cooler.
Iam still a fair ways off having it up and running but think I can see a way to the end , hopefully