csrss.exe (Client Server Runtime) is an essential graphics component of Windows.
dwm.exe (Desktop Window Manager) is also an essential part of Windows.
DDU and update gfx drivers.
Which part of the GPU is in use?
If it's the video encode, disable shadowplay or any other recording software.
Even applications in the background can use theses processes so double check for any graphical apps.
Failing all that, run a malware scan. Use multiple different scanners.
What you guys on about sata to 6 pin not being safe?
They run off the the exact same circuitry. The wires are the same size.
In this case I'd recommend getting a 1050ti without a PCI-e power connector as the PSU is only 320w and is likely proprietary.
Sorry for the late reply.
Could do. It's not as simple as more w/mk = better cooling.
Since you said the other side was flat, by dots do to mean dimples/divots? If so I'm not really sure why they'd be there.
If visuals is all you're after then in no particular order
2019/2020;
COD: Modern Warfare
Ghost Recon: Breakpoint
Metro: Exodus
Red Dead Redemption 2
Control
2017/2018;
Shadow of the Tomb Raider
Battlefield V
Far Cry 5
Project Cars 2
Forza Motorsport 7
1500mhz is the actual speed the module runs at.
DDR stands for Double Data Rate, meaning it's two bits per cycle thus the effective speed is doubled.
Has nothing to do with dual channel.
Intel focuses more on single threaded performance than AMD does.
Single thread passmark scores will give you a good idea of which chips perform best in KSP and MC.
Both of those are passive adaptors and will not deliver the full performance you're looking for.
You need an active adaptor.
There is no way (at least with consumer hw) to use the mobo's video outputs with the gfx card.
Take screenshots of the emails showing the time they came in, also of the login history of your email. It'll be really helpful if it shows that most logins are from one place but those suspicious ones are from somewhere completely different.
You can't use the mobo as an adaptor.
You need to build it into a working system with both the IDE and SATA drives plugged in. Then install an OS and copy the files over.
It's building static which is normal but you need to ground the case.
Get yourself some wire, any wire will do. Shielded is preferred in case of mains short.
Pin the wire with one of the case screws and run to something that is grounded.
If there isn't anything grounded you can attach the wire to, you'll have to run it outside and attach the wire to a metal rod stuck into the ground.