peger

I'm only worried about one thing, I would quickly run out of coolant

Even if it starts, it doesn't mean it's good. Check the voltage if you have multimeter . Does the motherboard have debug LED? What they show? EDIT: I looked at the picture of MB. Did you connect all CPU power cables? 8 and 4?

As if I saw myself:).

You forgot about the splatter. I welded fence and cleaning all the welds was real paine in... .

I finally bought a gas bottel and regulator for my mig. And I tell you compared to flux core wire it's like day and night :). And the cart I made.

It's a white page with a big sign "Yes we do have porn, lots of porn" ROLF . Google probably, or for me " firefox starting page" with links to websites i visit most often.

IDK. Did you check the jumper diagram on the disks. Different manufacturers may have different settings.

There should be jumpers on the drives. Set one drive as master and other as slave .

Good job .

Update 21 Cables holders. Front. Power cable Top panel backlight. 10 blue LEDs and 2 UV. Let there be light. Window installed Inside Putting everything together was a real pain in the ass. PSU cables are quite stiff, heat shrink tubing are very long and I think they filled them with some glue. So bending the cables was practically impossible, and I didn't want to cut and redone everything. The hardest part was connecting cpu power. I have a real mess under the tray. I thought about using RGB stripes instead of blue Leds. Fortunately, i used leds. They give a very nice blue glow. I need a new desk. For now it is still in "raw version" with leaves and roots ^^. I still plan to use my old laptop. Mainly for porn^^, torrents, android emulator etc...

I'd take 16GB 3600 if it's for gameing.

If I have time, maybe I can finish tomorrow. Update 20 Cable sleeving Here HDD 5mm Led I took connectors from my old PC, because they were signed. Very convenient. Some cable management. Mobo tray backlight. Fans, all three connected to one. Power, reset butions and hdd led. JRGB. I also made few simple cable holders. USB and Sata and DVDRW drive. I "borrowed" DVD from another computer (family) because mine doesn't read disc. I took a photo from the front but it was "damaged" just like three others The psu is suspended a few millimeters in the air so I added a piece of 4mm wood for support. How to connect wires from the case to the sliding panel. I don't know if this is a good solution One plus that you can't see it I also made wooden holder for that conector. I hope this will work without any problems. Masking plate. If I started doing this project now I would do one thing differently. I would add a shelf under the motherboard tray for hdd and psu. So that everything can be pulled out of the case together. It would be much more convenient and would simplify cable management. Only two things remain to be done. Top panel backlight. And one cable to connect all the lighting to the PSU. Unfortunately I don't have male sata power connector so i have to use molex instead. EDIT: If you ask yourself a question " why he need esata in 2019r?". The answer is simple I have old external (sata/USB2.0) hdd enclosure.

Definitely glasses. They look sexy (matter of preference) and add +10 to geekiness :D.

Smal Sunday update. I installed leds in mobo tray. And assembled everything. Using screws and nuts to mount the motherboard was not a good move after all. Let there be light

That's the plan. Thank you