shazammm

Yeah,the 3rd fan points at the psu shroud. Unfortunatelly the case is designed in such a way that even if i place 2x140mm, half of the bottom,second fan will point at the shroud.

gave up with asus bios. tried anything to set it lower than 60% but any value i entered lower than 60 it showed ''invalid input'' , set fan off from bios and instalaed a software where i manage to set it lower

1920x1080p 144hz i5 9600k

1-rx 580 nitro+ 4gb 110euro 2-gtx 1060 asus dual 3gb 120euro both new initially i wanted gtx 1660 ti but the cheaper version is 270 euro in my country

the one to the right was the only one available. pluged only one fan,no header for the other one available. already said i've tried from asus bios to lower the curve at the lower temps under 60% and it won't let me go under this value

when you're saying it's runing like shit that should manifest somehow. like low fps ,high temps,stutter etc. and you probably just getting a bad model from factory when most of the cards work fine shouldn't generalise on the whole brand

what do you exactly mean by that? why is your rx 580 runing like shit?

all my mobo fan controlers are 4 pin, while the p14 fan is 3pin. already knew that they cannot be controled with pwn. i was not issuing this problem. i was asking if is there a way that i can lower the rpm from 60% to some lower value since these are loud for me.some way like setting manualy the voltage and in that way making the rpm go lower

even tho 3pin is for DC, i can set it to pwm in the bios , but it's louder than the DC so no use for it,and in the DC settings i tried that in the curve but the curve doesn't want to go lower than 60% , that is 60% of 1700rpm. so they stay at around 1000rpm i can modify the curve at higher rpm but not lower than 60%. and for me they are really LOUD because i was used to a quiet case. i have an silentiumpc fera 3 120mm cpu fan that 99% of the time run between 600-1000 rpm and it's really quiet even in gaming. but these arctic p14 are advertised at 0.3 sone (22.5-24.5 db) at 1700 rpm ! that's defenetily a lie. they are really noticeble even at 1000rpm. they run at 12v most likely.

i have 2 arctic p14 140mm fans(3pin) . they are really loud eventho they are advertised at low db levels. they run at 60% rpm. is there any way i can lower the speed? i have an asus z370 prime II mobo. tried through bios but in the fan curve i cannot set them lower, there are 2 options there pwm and dc. if i set pwm they ran even louder. if i set silent mode in the dc it doesn't do anything it just modify the curve at higher values. i'd like to set them at 50% or 40% , is there any way?

any thoughts on where Xigmatek Scylla 120 (liquid cooler) should stand? on par with what coolers?

hmm saw some videos compararing the rx 570 with gtx 1060 . and the rx 570 surpased the gtx in some numerous titles, when at release point the gtx 1060 was rivaling with rx 580. now there are proably alot of fake benchmarks out there as well

saw alot of coments on different forums how lately amd drivers improved olders cards perfomance like the rx 480/580 and others , in comparasion with older nvidia cards which seems to not get the same improvement as amd and fall behind. is this really true and tested or it's just a placebo

wattage wise,more than enough. quality wise you can do probably better

that's interesting but i already went for 2 arctic AC p14 140mm , they were around 6 euro each and they are rated for 72.8 CFM,i think they are good value for the money. on the roof i don't think i will place any fans

yeah but how's that really working considering the case has 3 circles in front already set for the 3 fans? and i do not have the rgb version of the case, neither intending rgb fans

just ordered this case. not sure what to mount in front. 2x 140mm fans or 3x120mm? anyway, does anybody else owns this case? any thoughts?

Like what models?

yeah i know but people recommend monoprice modern retro. which i can't find on the eu site,wondered how they compare to them

https://www.monoprice.eu/products/monoprice-premium-hi-fi-dj-style-over-the-ear-pro-headphones-with-mic?variant=28331830345808 looking to buy from this site as it offers free shipping. but does anyone have experience with these?

well , the IT shop where i bought it from said it was never opened, gave me 12months warranty . bought a bunch of computer parts, never send anything to rma ,guess i was just lucky

what's wrong with it? bough an used corsair rm650x for 55euros with all the cables. works fine no problem in the past 6 months

Monitor : lenovo l24q-10 GPU : RX 570 sapphire nitro+ I have the gpu for 2 days. I don't remember having this problem before that or in the first day of using it but i'm not sure. I don't know how to describe it, but the display blinks for a very short moment (half a second) every 5-7 minutes. GPU runs fine otherwise , in games and unengine superposition no crashes or any problems. Some say it's related to Microsfot Visual C++ . I'm not sure if it's the GPU or monitor. Any suggestions? Thanks

anyone has an idea why does the memory frequency reset from 1750mhz to 1250mhz in wattman, on my rx 570 sapphire nitro after the superposition benchmark?

i disabled 0 RPM fan mode in wattman, and setup a curve so it wil always be at 20% RPM under 40C . but when i put my pc to sleep and return it, the fan doesn't start up spinning even tho the temp for the fan to spin are there. if i restart the fans work.