cc customs

some quick shots ?
completed in 95%. There are a few things left to do, but that's the details.
This is my first project, my first custom loop and my first custom case ?
Big thanks to
 
GIGABYTE 
AORUS 
Alphacool 
Aquatuning 
Phobya 
Samsung 
be quiet! PL 
Liquid.cool
 
 
without you, the project would not look like it looks ?
 
 
Specification
CPU: i7 7700k
GPU: AORUS GTX 1080 Ti Xtreme Edition
MOBO: AORUS GA-Z270X-Gaming 5
RAM: G-Skill Trident Z 16Gb 3200Mhz
PSU: Be quiet! STRAIGHT POWER 10 600W CM
SSD: Samsung 960 Pro 1Tb
Loop: Alphacool
Case: Custom
 
 

some quick shots ?
completed in 95%. There are a few things left to do, but that's the details.
This is my first project, my first custom loop and my first custom case ?
Big thanks to
 
GIGABYTE 
AORUS 
Alphacool 
Aquatuning 
Phobya 
Samsung 
be quiet! PL 
Liquid.cool
 
 
without you, the project would not look like it looks ?
 
 
Specification
CPU: i7 7700k
GPU: AORUS GTX 1080 Ti Xtreme Edition
MOBO: AORUS GA-Z270X-Gaming 5
RAM: G-Skill Trident Z 16Gb 3200Mhz
PSU: Be quiet! STRAIGHT POWER 10 600W CM
SSD: Samsung 960 Pro 1Tb
Loop: Alphacool
Case: Custom
 
 

some quick shots ?
completed in 95%. There are a few things left to do, but that's the details.
This is my first project, my first custom loop and my first custom case ?
Big thanks to
 
GIGABYTE 
AORUS 
Alphacool 
Aquatuning 
Phobya 
Samsung 
be quiet! PL 
Liquid.cool
 
 
without you, the project would not look like it looks ?
 
 
Specification
CPU: i7 7700k
GPU: AORUS GTX 1080 Ti Xtreme Edition
MOBO: AORUS GA-Z270X-Gaming 5
RAM: G-Skill Trident Z 16Gb 3200Mhz
PSU: Be quiet! STRAIGHT POWER 10 600W CM
SSD: Samsung 960 Pro 1Tb
Loop: Alphacool
Case: Custom
 
 

some quick shots
 
 

more soon...

some quick shots
 
 

Hello
 
 
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
 
 
The design is mine, all the pieces are done alone and are still under construction.
 
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
 
Little data.
 
dimensions:
 
Frame + covers 535x460x226 + glass 547x472x250
 
Fans:
 
Front x3 120
Top x3 140
Back x1 120
 
 
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
 
Below I upload some photos from the prototype of the rack.
 




















 

Stage 2
All elements already cut from the target material (at all still protective film)
 
Left to make the nuts to screw "glass" and put the residue.
 
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
 
 
















 

Stage 3
 






















 
 
Some photos from sponsors
 
 



























 
 
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
 
This project will only include Straight Power 10 600W


































 

First attempt of custom reservoir
 
 




















I have also got a motherboard and a processor but I need to take pictures
 
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
 
To be continued...
 
PS
Sorry for my English

Hello
 
 
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
 
 
The design is mine, all the pieces are done alone and are still under construction.
 
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
 
Little data.
 
dimensions:
 
Frame + covers 535x460x226 + glass 547x472x250
 
Fans:
 
Front x3 120
Top x3 140
Back x1 120
 
 
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
 
Below I upload some photos from the prototype of the rack.
 




















 

Stage 2
All elements already cut from the target material (at all still protective film)
 
Left to make the nuts to screw "glass" and put the residue.
 
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
 
 
















 

Stage 3
 






















 
 
Some photos from sponsors
 
 



























 
 
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
 
This project will only include Straight Power 10 600W


































 

First attempt of custom reservoir
 
 




















I have also got a motherboard and a processor but I need to take pictures
 
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
 
To be continued...
 
PS
Sorry for my English

some quick shots
 
 

some new fotos


























work in progress...








more soon

more soon...

Congrats man, looks epic!!! 

some new fotos


























work in progress...








more soon

I completely admire your craftsmanship.
+1

Hello
 
 
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
 
 
The design is mine, all the pieces are done alone and are still under construction.
 
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
 
Little data.
 
dimensions:
 
Frame + covers 535x460x226 + glass 547x472x250
 
Fans:
 
Front x3 120
Top x3 140
Back x1 120
 
 
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
 
Below I upload some photos from the prototype of the rack.
 




















 

Stage 2
All elements already cut from the target material (at all still protective film)
 
Left to make the nuts to screw "glass" and put the residue.
 
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
 
 
















 

Stage 3
 






















 
 
Some photos from sponsors
 
 



























 
 
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
 
This project will only include Straight Power 10 600W


































 

First attempt of custom reservoir
 
 




















I have also got a motherboard and a processor but I need to take pictures
 
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
 
To be continued...
 
PS
Sorry for my English

I literally said "wooowww" to myself out loud multiple times looking through this. I can't wait to see more! This is looking beauuuutiful. 

Yay almost after a month of waiting

First fitting of mobo and custom reservoir behind me. It looks promising
 
 












And some fun with cable sleeving  
 
 




 
 
more soon...

First fitting of mobo and custom reservoir behind me. It looks promising
 
 












And some fun with cable sleeving  
 
 




 
 
more soon...

small prototype of cable management on fragment of mobo tray















 

Hello
 
 
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
 
 
The design is mine, all the pieces are done alone and are still under construction.
 
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
 
Little data.
 
dimensions:
 
Frame + covers 535x460x226 + glass 547x472x250
 
Fans:
 
Front x3 120
Top x3 140
Back x1 120
 
 
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
 
Below I upload some photos from the prototype of the rack.
 




















 

Stage 2
All elements already cut from the target material (at all still protective film)
 
Left to make the nuts to screw "glass" and put the residue.
 
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
 
 
















 

Stage 3
 






















 
 
Some photos from sponsors
 
 



























 
 
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
 
This project will only include Straight Power 10 600W


































 

First attempt of custom reservoir
 
 




















I have also got a motherboard and a processor but I need to take pictures
 
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
 
To be continued...
 
PS
Sorry for my English

Looking very nice sir. Love the red accents.
I'm curiously awaiting more  

Hello
 
 
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
 
 
The design is mine, all the pieces are done alone and are still under construction.
 
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
 
Little data.
 
dimensions:
 
Frame + covers 535x460x226 + glass 547x472x250
 
Fans:
 
Front x3 120
Top x3 140
Back x1 120
 
 
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
 
Below I upload some photos from the prototype of the rack.
 




















 

Stage 2
All elements already cut from the target material (at all still protective film)
 
Left to make the nuts to screw "glass" and put the residue.
 
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
 
 
















 

Stage 3
 






















 
 
Some photos from sponsors
 
 



























 
 
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
 
This project will only include Straight Power 10 600W


































 

First attempt of custom reservoir
 
 




















I have also got a motherboard and a processor but I need to take pictures
 
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
 
To be continued...
 
PS
Sorry for my English

Hello
 
 
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
 
 
The design is mine, all the pieces are done alone and are still under construction.
 
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
 
Little data.
 
dimensions:
 
Frame + covers 535x460x226 + glass 547x472x250
 
Fans:
 
Front x3 120
Top x3 140
Back x1 120
 
 
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
 
Below I upload some photos from the prototype of the rack.
 




















 

Stage 2
All elements already cut from the target material (at all still protective film)
 
Left to make the nuts to screw "glass" and put the residue.
 
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
 
 
















 

Stage 3
 






















 
 
Some photos from sponsors
 
 



























 
 
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
 
This project will only include Straight Power 10 600W


































 

First attempt of custom reservoir
 
 




















I have also got a motherboard and a processor but I need to take pictures
 
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
 
To be continued...
 
PS
Sorry for my English

Hello
 
 
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
 
 
The design is mine, all the pieces are done alone and are still under construction.
 
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
 
Little data.
 
dimensions:
 
Frame + covers 535x460x226 + glass 547x472x250
 
Fans:
 
Front x3 120
Top x3 140
Back x1 120
 
 
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
 
Below I upload some photos from the prototype of the rack.
 




















 

Stage 2
All elements already cut from the target material (at all still protective film)
 
Left to make the nuts to screw "glass" and put the residue.
 
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
 
 
















 

Stage 3
 






















 
 
Some photos from sponsors
 
 



























 
 
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
 
This project will only include Straight Power 10 600W


































 

First attempt of custom reservoir
 
 




















I have also got a motherboard and a processor but I need to take pictures
 
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
 
To be continued...
 
PS
Sorry for my English